Cooktop Control Pads
Using the Touch Control
Be sure that your finger is placed in the center of the touch pad. If the finger is not placed on the center of a pad, the cooktop may not respond to the selection made.
Lightly contact the pad with the fiat part of your entire
fingertip. Do not just use the narrow end of your fingertip.
Cooktop Power Pad
The Cooktop POWER key pad activates the entire Cooktop. To power the cooktop, touch and hold the POWER key pad for 2 seconds. A beep wiii sound and the Power LED will glow (Fig. 11). The cooktop wiii be in a ready mode for 10 seconds. If no other key pads are touched the Cooktop Main POWER will turn OFF automatically. To turn the Main Power OFF touch and hold the Main POWER key pad for 1 second. A beep wiii sound and the Power LED wiii turn OFF (Fig. 10).
Cooking Zone On/Off Pad
Each of the Cooking Zones have separate ON/OFF key pads. Once the Main Power key pad has been touched to activate the cooktop, touch the corresponding Cooking Zone ON/OFF key pad once to activate the Cooking Zone
needed.
@
Fig. 16 Fig. 17
Fig. 10 Fig. 11
Controls Lock Pad
This feature allows the cooktop to be locked only when the cooktop is switched to OFF. Touch and hold the LOCI( key pad for 3 seconds. A beep will sound and the Loci< LED will glow (Fig. 13). Once locked, no other displays wiii glow and no Cooking Zones wiii activate. To turn the Controls Loci< OFF, touch and hold the LOCI( key pad for 3 seconds. A beep will sound, the Loci< LED wiii turn OFF (Fig. 12) and the
cooktop may be used normally. | • |
Fig. 12 | Fig. 13 |
Error Codes Display Message
The error code will display in the zone that has the error. The error will flash through the code C, X, X (Example Fig. 14) where the X is the number of the code. If the zone has been on and the zone is hot enough to display H [Example Fig.
15)and you have an error then you will see C, X, X, H. For service call I=800=4=MY=HOME®.
Fig. 14
Fig. 15
Power Level Settings
The Cooking Zones have separate Power Level Alpha- Numeric displays. Once active, the Cooking Zones will provide 15 Power Levels to choose from. These include 1(Fig. 18), 2, 2, 3, 3., % LI.,S, 5., 6, E. (Fig. 19), 7, 8, 9, ,o. Half power levels [available between 2 and "/power level) are indicated by lighting the display decimal point (Fig. 19). The highest
setting of P or "Power Boost" provides approximately 139% power for 10 minutes (Fig. 20). After 10 minutes, the power level drops to 9. Each key pad touch (or just holding down the Power Level key pad) will scroll through all the available power levels for any Cooking Zone quickly.
Fig. 18 | Fig. 19 | Fig. 20 |
Residual Heat Message
Once any Cooking Zone has been used for cooking and turned OFF, and if the cooktop surface temperature on any of the Cooking Zones is still too HOT, H (Fig. 21) will appear
in the
Zone. The H will continue to display if the temperature is still too HOT.
The Cooking | Zones | may |
|
appear to be cool while turned ON and after |
| ||
they have been turned OFF. But the glass |
| ||
surface may be HOT from residual | heat |
| |
transferred from the cookware | and | burns may | Fig. 21 |
occur if surface is touched. |
|
|
|
8