Toshiba DVR620KU Formatting a Disc, Choosing the Recording Format of a Brand-New DVD-RW

FORMATTING A DISC

Choosing the Recording Format of a Brand-New DVD-RW

When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the desired mode. You can also manually format a DVD-RW once it has been used.

OPEN/ INPUT

CLOSE SELECT HDMI

.@/: ABC DEF

GHI JKL MNO TRACKING

PQRS TUV WXYZ SAT.LINK

	SPACE		TIMER
			PROG.
	SETUP	DISPLAY	AUDIO
DISC MENU			TOP MENU
	ENTER
CLEAR			RETURN
	INSTANT	1.3x/0.8x	TIME SLIP
	SKIP	PLAY
REV	PLAY		FWD
SKIP	STOP		SKIP
PAUSE		VCR	DVD
DUBBING		REC MODE REC
REPEAT TIMER SET SEARCH			ZOOM

SE-R0295

Note

•The recording format setting is effective only for DVD-RW. You cannot change the recording format for a DVD-R and DVD+RW/+R.

•You cannot mix two formats on one DVD-RW disc. If you insert a disc that has been formatted before, the recording format is not changed if you select another format in the “Setup” menu only. To reformat a disc (change disc format type), refer to “Reformatting a Disc Manually” on page 29.

1Press [SETUP].

2Use [K / L] to select “DVD Menu”, then press [ENTER].Setup

General Setting

Timer Programming

Title List

DVD Menu

3Use [K / L] to select “Format”, then press [ENTER].DVD Menu

Format

Finalize

4Use [K / L] to select “Format Mode”, then press [ENTER].DVD Menu

Format

FinalizeStart

Format Mode

5Use [K / L] to select “Video mode” or “VR mode”, then press [ENTER].

6Press [SETUP] to exit.

7 Insert a brand-new disc. Formatting will start.

Formatting 90%

8Formatting is completed.“100%” is indicated.

28 EN

E9PKAUD_DVR620KU_EN.indd 28

3/25/2009 3:47:38 PM