Toshiba RD-XS54SU Playing the digest Skip Search, Playing all titles original/playlist in a disc

Resuming playback from the location last stopped (Title resume)

The recorder memorizes the location you last stopped playback to resume from there.

To use this function, set “HDD/RAM title play” ( page 183) to “Title resume.” The recorder will memorize the location you last stopped at in each title, so you can resume playback from there. For example, if there are 6 titles, you can start each of them as if you had stored 6 video tapes in the recorder.

•To return to the beginning of the title

During playback, press QUICK MENU button, then press / buttons to select “Restart title,” then press ENTER button.

•To play another title

Press CONTENT MENU button to display

“CONTENT MENU Title List,” then select a title.

You can make the recorder memorize only the very last point, regardless of the number of titles. Set “HDD/RAM title play” ( page 183) to “Serial playback.”

•To return to the beginning of the title Press SKIP () button repeatedly until the beginning of the title appears.

•To play the other title

Press SKIP ( / ) button repeatedly.

Notes

•Depending on conditions or contents, playback may not start from the location last stopped at, but instead another location. For example, from the beginning of the disc or title.

•Depending on a disc, there may be a slight difference between the location the recorder memorizes and the actual location where playback starts.

•This function is not available on DVD-R/RW discs.

•The resuming function will not work if the write-protect tab

is set to “PROTECT” ( page 8).

Playing the digest (Skip Search)

This feature repeats playback of about 5 seconds and skip of 1 minute from the beginning to the end of a recorded title, so that you can view the digest of it.

1)Perform steps 1 and 2 on page 60, and select a title that you want to view the digest.

2)Press QUICK MENU. Quick Menu is displayed.

3)Press / to select “Special playback mode”, then press ENTER.

4)Press / to select “Skip search”, then press

ENTER.

The Skip Search starts.

Notes

•This feature can be used for only one title (original) recorded on the HDD or a DVD-RAM disc.

•While using this feature, you cannot use speed-related functions such as fast forward or fast reverse.

•If you press ENTER button while using this feature, the normal playback starts.

•To cancel this feature, press STOP button twice.

Viewing the first scene of a title (Original) (Intro scan)

1)After step 1 on page 60, press QUICK MENU. Quick Menu appears.

2)Press / to select “Special playback mode”, then press ENTER.

3)Press / to select “Intro scan”, then press

ENTER.

The recorder plays the first 5 seconds of each title beginning from title 1.

You can go forward or back by pressing SKIP buttons.

: to go to the next title.

: to go back to the current title.

Press twice to go back to the previous title.

4)When you find a desired title, press ENTER. The selected title is played.

Notes

•To stop Intro Scan, press STOP button twice.

•This feature can be used for only titles (Original) recorded on the HDD or a DVD-RAM disc.

Playing all titles (original/playlist) in a disc

Set “HDD/RAM title play” ( page 183) to “Serial playback”. You can play all titles in the HDD and DVD- RAM disc in the order of the thumbnails on CONTENT MENU, as if they were recorded in one video tape.

Introduction RecordingPlayback

Editing

LibraryNetwork Navi Function setup Others

63