Toshiba RD-XS54SU Press REC, Recording Recording a TV program, Customizing the MN mode

Recording

Recording a TV program (Continued)

You can set in advance the desired mode for each recording media (“HDD”, “DVD”). See below.

Also for your customization of the MN mode, see below.

4 Press REC.

Recording starts.

REC

Customizing the MN mode

1)During stop or at step 3 on page 45, press

QUICK MENU.

2)Press / to select “User record quality” then press ENTER.

3)Change the setting for each recording media.

•Press / to select “HDD” or “DVD”.

•Press ADJUST to select the setting number (1 - 5).

e.g.

		User record quality
			HDD	Setting 1	DVD			– – –
			Manual 6.6 L-PCM		SP		4.6			D/M1
	Custom setting
			Setting	Mode	Rate	Audio quality
1				Manual	6.6			L-PCM
2
				SP	4.6				D/M1
3				LP	2.2				D/M1
4				Manual	6.0				D/M2

5Manual 3.2 D/M1

Total recording time: approx. 71min. (with 4.7 GB unused)

Notes

•To record a high quality picture, select “MN” to raise a bit rate. The higher the bit rate, the better the picture quality is, but the shorter the recording length becomes. We recommend that you set this between 6.0 Mbps and 6.8 Mbps.

•You can change the combination of picture and audio quality settings also by displaying the Quick Menu on LIBRARY MENU or in stop mode, then selecting “User Record Quality”. Either of the above methods updates the setting of this recorder.

•If you set “SP” or “LP”, you cannot select “L-PCM”.

•Depending on the audio quality settings, the upper limit for the picture quality setting differs.

•You can adjust the manual rate for picture quality by

0.2 Mbps from 2.0 to 9.2. (You cannot set the rate from 1.4 to 2.0.)

You can customize each setting.

Press / / / to select “Mode”, “Rate” or ‘“Audio quality”, then press ADJUST to change the value.

4) Press ENTER.

The menu disappears.

46