Pioneer RS-232C manual Select Audio DVD, Select Aspect DVD, Select Angle DVD

Page 36
5.26Select Audio (DVD)

DVD-V5000 DVD Player

RS-232 Command Protocol

5.26Select Audio (DVD)

Function

:

Select Audio

Format

:

Integer AU

Explanation : The command selects the audio channel (Audio Track). The player allows up to 8 audio channels for playback. If an unavailable number is selected, the player returns an E06 error message.

NOTE: If the setting is 0, the Audio Mute is ON.

Execution :

 

 

 

String

Status Return

DVD player

 

 

 

Play mode

 

0AU<CR>

 

 

 

 

R<CR>

Audio Mute ON

5.27Select Aspect (DVD)

Format

:

Select Aspect Ratio

Function

:

Integer AP

Explanation : The command sets the Aspect Ratio for playback. The three ratios are Pan & Scan, Letter Box or Wide. If a disc does not offer video output options, the player returns an E04 error message.

Argument

Aspect Ratio (Video output)

1Pan & Scan

2Letter Box

3Wide

5.28Select Angle (DVD)

Function

:

Select Angle

Format

:

Integer AG

Explanation : The command selects a viewing angle. The player allows up to 9 angles (1AG through 9AG) for playback. If an unavailable angle is selected, the player returns an error message (E04 or E06).

Execution :

 

 

 

String

Status Return

DVD player

 

 

 

Play mode

 

1AG<CR>

 

 

 

 

R<CR>

Angle is changed

- 29

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Business Solutions Division Manual Version June 30Pioneer Corporation Pioneer Electronics USA Inc DVD-V5000Information in this document is subject to change without notice Copyright c 2004-2005 Pioneer Electronics USA IncDocument No. V5000RS232CPM-100 Printed in the United States of Americaverify the cables and connectors between components are shielded SAFETY CAUTIONFCC INFORMATION increase separation between the player and componentsTable of Contents 4. COMMAND STRUCTURE5. COMMAND DESCRIPTIONS INTRODUCTION6. CURRENT PLAYER CONDITION REQUEST Descriptions OPERATING MODES DVD-V5000 INTERNAL REGISTERSEXTEND TERMINAL CONTROL 1. INTRODUCTION Chapter NumberDescription 2. INTERFACE 2.1 Interface Connector 2.2 Serial Interface Pin SpecificationPin # Terminal2.3 Computer Control Functions Input/OutputPower ON mode Power OFFmore than 100 msec 3. SERIAL CONTROL 3.1 Serial Interface Specifications 3.2 Communication with a Computer3.1.1 Signal Interface 3.1.2 Data Type3.3 Command and Status ?P to determine the Active mode of the player 3.4 Error Messages 3.5 Initial SettingRegister/Switch Setting at Power ON4. COMMAND STRUCTURE COMMANDName MnemonicCOMMAND 4.1 Command Mnemonic 4.3 Command String4.2 Argument 4.5 Error Message 4.4 Status Returns4.6 Request Status Return RxD P TxD Execution4.7 Timing 5. COMMAND DESCRIPTIONS 5.1 Open 5.2 Close5.3 Reject Door Opens Tray EjectsError - No disc in tray 5.3.1 RejectStart 5.5 Play 5.6 Pause 5.7 Still DVD, VCDplays to 3 minutes seconds5.8 Step Forward or Reverse DVD 5.9 Scan Forward, Reverse, or StopMoves Frame forward5.10 Multi-Speed Forward or Reverse DVD 5.11 Speed DVD, VCD plays to 3 min. 25 secs5.12 Search Search to specified address5.13 Search & Play Search to Frame4500 Address Mode set = Frame5.14 Stop Marker 5.15 Lead-Out Symbol plays to 3 minutes 25 seconds⇒ Still mode 5.16 Clear Time code in program end areaContinue playing to lead-out and then return RCR5.17 Frame DVD 5.18 Block Number CD5.19 Time excludes discs without Time Codes searches to Frame5.20 Chapter DVD 5.21 Title DVDSearch to 123 min secs5.23 Index CD 5.24 TRACK CD, VCD5.25 Select Subtitle DVD IX1204SECR Search to Index 4, Track5.26 Select Audio DVD 5.27 Select Aspect DVD5.28 Select Angle DVD 5.29 Select Parental-Level DVD 5.30 Audio Control DVD, CD, VCD5.31 Video Control 5.32 Display Control Display condition is set onRegister A 5.33 Key Lock The key lock switches ON / OFF5.35 Barcode /Command Stack Play DVD 5.34 Stack Group Set DVDExecute Barcode/Command Stack 5.36 Stack Data Upload Numbers ofbytes 1 Fixed data Example Segment Play Command Title 02, from Frame 3600 to Frame 4800 5.37 Stack Data Download 6. CURRENT PLAYER CONDITION REQUEST DESCRIPTIONS 6.1 P-Block Number Request6.2 Title/Track Number Request Track 12, Index 1, 3 minutes6.3 Chapter Number Request DVD 6.4 Time Code RequestPlayer plays Track Player plays Chapter6.5 Block Number Request CD 6.6 Frame Number Request DVD32 minutes, 13 secondsCD/VCD 117 minutes, 42 secondsDVD6.7 Index Number Request CD 6.8 Total Frame Request DVD6.9 TOC Information Request CD/VCD Track 1, Index6.10 Disc Region Code Request DVD 6.11 DVD Disc Status Requestfirst Track is 1, last Track is lead-out Time is 66 min, 55 secdisable Time Search Error - except DVD disc loaded6.12 CD Disc Status Request Disc is not mounted6.13 Register A Set TrackTime The screen display positions are pictured below 6.14 Register D Set 6.15 Print CharacterOnly Frame number is displayed 6.16 Clear Screen Register A and Display controlSelect Line Displays the characters like this6.17 Advanced Setup Title repeat modeBaud rate is 9600bps Tray lock onCCR = 3 Default Communication Mode 6.18 Communication Control Set6.19 Player Active Mode Request to CCR = 2 Communication Mode-26.21 Advanced Setup Request 6.20 Player Model Name RequestSeries name P1570 and code 6.22 Player Region Code Request 6.23 CCR Mode Request6.24 Input Number Request Region Code6.25 Error Code Request 7 entered from remote controllerReceives the Pause Key command -A39F 6.26 Input Unit Request6.27 Input Barcode Data Request 6.28 Register A Request6.29 Register D Request Receives a Play code about DVD disc6.30 Menu Call DVD Sets the Register DRequests information from Register D6.31 Numeric Button DVD 6.32 Button Select DVD6.33 Enter Button DVD 6.34 Get Information DVD X1 X2 X3 Y1 Y2 Y3Others 6.35 Memory Data Upload Contents6.36 Return Firmware Version Returns current firmware version7.3 Setup 7.4 Random Access7. OPERATING MODES 7.1 Open7.5 Reject 8.6 Remote Control Use Address Flag 8.7 Remote Control Digit Buffer8. DVD-V5000 INTERNAL REGISTERS 8.1 Current Time/Frame8.8 Remote Control Data Register 8.9 Laser Barcode Buffer8.10 Serial Use Address Flag 8.11 Search Time/Frame8.15 Mark Title/Track Mark Chapter 8.16 Mark Index8.17 Video Control 8.18 Audio ControlREGISTER MODEL 9. EXTEND TERMINAL CONTROL 9.1 Function Assignment FunctionSTACK GROUP7 STACK GROUP8STACK GROUP9 STACK GROUP109.2 Function User Setting RIGHT Button ENTER button to change the function of switch 8 to MENU DOWN Button to select MENUFor an initial setting, Standard and User are the same 9.3 Controller 9.2.2 Diode Matrix Circuit 10. ADDITIONAL NOTES APPENDIX A - COMPLETE COMMAND LIST BY NAME SUPPORTINGFORMATS COMMAND APPENDIX B - COMPLETE COMMAND LIST BY MNEMONIC COMMAND APPENDIX C - DVD COMMAND LIST COMMAND APPENDIX D - CD COMMAND LIST arg VD APPENDIX E - VCD COMMAND LIST COMMAND APPENDIX F - ERROR CODES Industrial DVD Player RS-232 Command Protocol Business Solutions Division 2265 East 220th StreetDVD-V5000 Pioneer Electronic Corporation
Related manuals
Manual 107 pages 53.92 Kb

RS-232C specifications

The Pioneer RS-232C is a significant component in the realm of communication technology, especially known for its application in serial communications. Initially introduced in the 1960s as part of the EIA-232 standard, RS-232C has evolved through various iterations to become a foundational interface for connecting data communication equipment (DCE) with data terminal equipment (DTE). This article outlines its main features, technologies, and characteristics.

One of the hallmark features of RS-232C is its ability to facilitate point-to-point communication. It allows for a direct link between two devices, making it suitable for a variety of applications, including modems, printers, computers, and other peripherals. The RS-232C interface typically uses a 25-pin connector, although a 9-pin variant is also common in many modern devices. This interface is based on serial communications, where bits are sent sequentially over a single channel, leveraging fewer wires compared to parallel communication methods.

In terms of technology, RS-232C operates primarily at voltage levels of +12V to -12V, which provide the necessary signaling for data transmission. The standard supports baud rates ranging from 300 to 115200 bps, accommodating various data transfer speeds depending on the needs of the hardware involved. RS-232C defines various electrical characteristics and timing requirements, ensuring robust performance over relatively short distances, typically up to 15 meters, depending on the baud rate.

Another essential aspect of the RS-232C standard is its use of asynchronous communication, allowing devices to transmit data without having to synchronize their clocks. Each data packet typically consists of a start bit, a predefined number of data bits (usually 7 or 8), an optional parity bit for error-checking, and one or more stop bits. This method allows for error detection and ensures data integrity during transmission.

Despite its age, the RS-232C interface remains relevant, especially in industrial applications, instrumentation, and legacy systems. Its simplicity, low cost, and widespread acceptance make it a versatile choice for connecting various devices, even in a world increasingly dominated by USB and other modern interfaces.

In conclusion, the Pioneer RS-232C is a remarkable testament to the enduring nature of serial communication technology. Its straightforward design, reliability, and ease of integration continue to make it a staple in numerous applications, underscoring its significance in the landscape of data communication.
Top Page Image Contents