Pioneer RS-232C manual Register D Set, Print Character, Only Frame number is displayed

Page 54
Only Frame number is displayed

DVD-V5000 DVD Player

RS-232 Command Protocol

The user’s area has lines numbered from 0 to 9 with a total of 10 lines available. If line 0 is designated to show system information, all following lines are hidden.

The player allows/displays up to 320 characters (32 characters per line with

10 lines available). Follow the instructions below to create a User’s Display:

1.Select User's Display in Register A

2.Set the display data using a print character command

3.Turn display switch ON

Execution :

 

 

 

String

Status Return

DVD player

 

1DS<CR>

R<CR>

Display Off to Display On

 

1RA<CR>

R<CR>

Only Frame number is displayed

6.14Register D Set

Function

:

current setting of Register D is rewritten

Format

:

Integer RD

Explanation : Register D contains the termination setting of the serial communication (RS232). There are two choices, “CR” or “CR + LF”. The default for Register D is 0.

Argument

Function

0 (default)

CR

64CR + LF

6.15Print Character

Function

: Characters are written into the User's Display Area

 

(Not to be issued simultaneously with other commands)

Format

: Integer PR <CR>

Character string <CR>

Explanation : The command writes a character string for one line into the User Display Area (turn ON the User Display Specification in Register A).

Follow the instructions listed below to create printed characters.

1. Specify the line number using an integer in the range 0 ~ 9

- 47

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Pioneer Corporation Pioneer Electronics USA Inc Business Solutions DivisionManual Version June 30 DVD-V5000Document No. V5000RS232CPM-100 Information in this document is subject to change without noticeCopyright c 2004-2005 Pioneer Electronics USA Inc Printed in the United States of AmericaFCC INFORMATION verify the cables and connectors between components are shieldedSAFETY CAUTION increase separation between the player and components5. COMMAND DESCRIPTIONS Table of Contents4. COMMAND STRUCTURE INTRODUCTION6. CURRENT PLAYER CONDITION REQUEST Descriptions OPERATING MODES DVD-V5000 INTERNAL REGISTERSEXTEND TERMINAL CONTROL 1. INTRODUCTION Chapter NumberDescription Pin # 2. INTERFACE 2.1 Interface Connector2.2 Serial Interface Pin Specification Terminal2.3 Computer Control Functions Input/OutputPower ON mode Power OFFmore than 100 msec 3.1.1 Signal Interface 3. SERIAL CONTROL 3.1 Serial Interface Specifications3.2 Communication with a Computer 3.1.2 Data Type3.3 Command and Status ?P to determine the Active mode of the player Register/Switch 3.4 Error Messages3.5 Initial Setting Setting at Power ONName 4. COMMAND STRUCTURECOMMAND MnemonicName 4.1 Command Mnemonic 4.3 Command String4.2 Argument 4.5 Error Message 4.4 Status Returns4.6 Request Status Return RxD P TxD Execution4.7 Timing 5.3 Reject 5. COMMAND DESCRIPTIONS 5.1 Open5.2 Close Door Opens Tray EjectsError - No disc in tray 5.3.1 RejectStart 5.5 Play plays to 3 minutes 5.6 Pause5.7 Still DVD, VCD secondsMoves 5.8 Step Forward or Reverse DVD5.9 Scan Forward, Reverse, or Stop Frame forward5.10 Multi-Speed Forward or Reverse DVD 5.11 Speed DVD, VCD plays to 3 min. 25 secs5.12 Search Search to specified address4500 5.13 Search & PlaySearch to Frame Address Mode set = Frame5.14 Stop Marker 5.15 Lead-Out Symbol plays to 3 minutes 25 seconds⇒ Still mode Continue playing to lead-out and 5.16 ClearTime code in program end area then return RCR5.19 Time excludes discs without Time Codes 5.17 Frame DVD5.18 Block Number CD searches to FrameSearch to 123 min 5.20 Chapter DVD5.21 Title DVD secs5.25 Select Subtitle DVD 5.23 Index CD5.24 TRACK CD, VCD IX1204SECR Search to Index 4, Track5.26 Select Audio DVD 5.27 Select Aspect DVD5.28 Select Angle DVD 5.29 Select Parental-Level DVD 5.30 Audio Control DVD, CD, VCD5.31 Video Control 5.32 Display Control Display condition is set onRegister A 5.33 Key Lock The key lock switches ON / OFF5.35 Barcode /Command Stack Play DVD 5.34 Stack Group Set DVDExecute Barcode/Command Stack 5.36 Stack Data Upload Numbers ofbytes 1 Fixed data Example Segment Play Command Title 02, from Frame 3600 to Frame 4800 5.37 Stack Data Download 6.2 Title/Track Number Request 6. CURRENT PLAYER CONDITION REQUEST DESCRIPTIONS6.1 P-Block Number Request Track 12, Index 1, 3 minutesPlayer plays Track 6.3 Chapter Number Request DVD6.4 Time Code Request Player plays Chapter32 minutes, 13 secondsCD/VCD 6.5 Block Number Request CD6.6 Frame Number Request DVD 117 minutes, 42 secondsDVD6.9 TOC Information Request CD/VCD 6.7 Index Number Request CD6.8 Total Frame Request DVD Track 1, Indexfirst Track is 1, last Track is 6.10 Disc Region Code Request DVD6.11 DVD Disc Status Request lead-out Time is 66 min, 55 sec6.12 CD Disc Status Request disable Time SearchError - except DVD disc loaded Disc is not mounted6.13 Register A Set TrackTime The screen display positions are pictured below 6.14 Register D Set 6.15 Print CharacterOnly Frame number is displayed Select Line 6.16 Clear ScreenRegister A and Display control Displays the characters like thisBaud rate is 9600bps 6.17 Advanced SetupTitle repeat mode Tray lock on6.19 Player Active Mode Request CCR = 3 Default Communication Mode6.18 Communication Control Set to CCR = 2 Communication Mode-26.21 Advanced Setup Request 6.20 Player Model Name RequestSeries name P1570 and code 6.24 Input Number Request 6.22 Player Region Code Request6.23 CCR Mode Request Region CodeReceives the Pause Key command -A39F 6.25 Error Code Request7 entered from remote controller 6.26 Input Unit Request6.29 Register D Request 6.27 Input Barcode Data Request6.28 Register A Request Receives a Play code about DVD discRequests information from 6.30 Menu Call DVDSets the Register D Register D6.31 Numeric Button DVD 6.32 Button Select DVD6.33 Enter Button DVD 6.34 Get Information DVD X1 X2 X3 Y1 Y2 Y3Others 6.35 Memory Data Upload Contents6.36 Return Firmware Version Returns current firmware version7. OPERATING MODES 7.3 Setup7.4 Random Access 7.1 Open7.5 Reject 8. DVD-V5000 INTERNAL REGISTERS 8.6 Remote Control Use Address Flag8.7 Remote Control Digit Buffer 8.1 Current Time/Frame8.10 Serial Use Address Flag 8.8 Remote Control Data Register8.9 Laser Barcode Buffer 8.11 Search Time/Frame8.17 Video Control 8.15 Mark Title/Track Mark Chapter8.16 Mark Index 8.18 Audio ControlREGISTER MODEL 9. EXTEND TERMINAL CONTROL 9.1 Function Assignment FunctionSTACK GROUP9 STACK GROUP7STACK GROUP8 STACK GROUP109.2 Function User Setting RIGHT Button ENTER button to change the function of switch 8 to MENU DOWN Button to select MENUFor an initial setting, Standard and User are the same 9.3 Controller 9.2.2 Diode Matrix Circuit 10. ADDITIONAL NOTES APPENDIX A - COMPLETE COMMAND LIST BY NAME SUPPORTINGFORMATS FORMATS APPENDIX B - COMPLETE COMMAND LIST BY MNEMONIC FORMATS APPENDIX C - DVD COMMAND LIST COMMAND APPENDIX D - CD COMMAND LIST arg VD APPENDIX E - VCD COMMAND LIST COMMAND APPENDIX F - ERROR CODES DVD-V5000 Industrial DVD Player RS-232 Command ProtocolBusiness Solutions Division 2265 East 220th Street Pioneer Electronic Corporation
Related manuals
Manual 107 pages 53.92 Kb

RS-232C specifications

The Pioneer RS-232C is a significant component in the realm of communication technology, especially known for its application in serial communications. Initially introduced in the 1960s as part of the EIA-232 standard, RS-232C has evolved through various iterations to become a foundational interface for connecting data communication equipment (DCE) with data terminal equipment (DTE). This article outlines its main features, technologies, and characteristics.

One of the hallmark features of RS-232C is its ability to facilitate point-to-point communication. It allows for a direct link between two devices, making it suitable for a variety of applications, including modems, printers, computers, and other peripherals. The RS-232C interface typically uses a 25-pin connector, although a 9-pin variant is also common in many modern devices. This interface is based on serial communications, where bits are sent sequentially over a single channel, leveraging fewer wires compared to parallel communication methods.

In terms of technology, RS-232C operates primarily at voltage levels of +12V to -12V, which provide the necessary signaling for data transmission. The standard supports baud rates ranging from 300 to 115200 bps, accommodating various data transfer speeds depending on the needs of the hardware involved. RS-232C defines various electrical characteristics and timing requirements, ensuring robust performance over relatively short distances, typically up to 15 meters, depending on the baud rate.

Another essential aspect of the RS-232C standard is its use of asynchronous communication, allowing devices to transmit data without having to synchronize their clocks. Each data packet typically consists of a start bit, a predefined number of data bits (usually 7 or 8), an optional parity bit for error-checking, and one or more stop bits. This method allows for error detection and ensures data integrity during transmission.

Despite its age, the RS-232C interface remains relevant, especially in industrial applications, instrumentation, and legacy systems. Its simplicity, low cost, and widespread acceptance make it a versatile choice for connecting various devices, even in a world increasingly dominated by USB and other modern interfaces.

In conclusion, the Pioneer RS-232C is a remarkable testament to the enduring nature of serial communication technology. Its straightforward design, reliability, and ease of integration continue to make it a staple in numerous applications, underscoring its significance in the landscape of data communication.
Top Page Image Contents