Pioneer Connecting Your DVD Player, Connecting two DV-F07 players?, Connection Guide, Names

Making Connections

Connecting Your DVD Player

Unlike any other audiovisual media format, DVD offers a wide array of audio and video output options which allows playback to be enjoyed in any number of system configurations from a standard TV with stereo audio input to a home theater system with a projection monitor and full surround sound capabilities.

Connecting two DV-F07 players?

If you have chosen to purchase two DV-F07 players for combined control of up to 601 discs, make connections to the player to be used as the Master player following the procedures in this section. When connections are complete, refer to page 66 for a description of how to connect the Slave player.

Connection Guide

The illustration on this page shows the basic setup using the audio and video cords included with this player. Use this illustration as a guide to setting up your home system.

An explanation of each type of audio and video connection available can be found on pages 17 and 18. To determine the best audio and video connection setup for your system, refer to the manuals supplied with the components you are making connections to.

In addition to making physical connections to your TV or monitor, it is also necessary to assign the TV screen size. You can use the [Setup Navigator] in the Setup screen General menu to set whether you are using a wide screen or standard size TV or monitor (page 21). Additionally, you can use the [TV Screen] setting in the Setup screen Video menu (page 43).

Notes

•When making connections to this unit or when changing

connections, check that the unit is off by pressing

STANDBY/ON and unplug the power cord from the power outlet.

•The video outputs on this player uses copy protect circuitry to prevent the video playback on DVDs from being copied. If you connect the player to a TV via a VCR, or record and play back the contents of a disc with a VCR, the playback picture may not be normal.

NAMES

	OUT
		VIDEO					INTERFACE
					2		CONNECTOR
	IN
			MASTER-SLAVE
	OUT		CONTROL
			MASTER
		S-VIDEO
	IN		SLAVE		VIDEO SELECT
	VIDEO SELECT		OPT.
			OUT
			OUT	DIGITAL
Y PB		PR
	COMPONENT		IN
	VIDEO OUT
R	L
		OUT	CONTROL
			IN
		IN	CD-DECK			Audio cord
			SYNCHRO			(Included)
	AUDIO
					TV or monitor		3
Video cord
(Included)							4
1		VIDEO IN	S-VIDEO IN			L	R
							AUDIO IN

AND FUNCTIONS / MAKING CONNECTIONS

1Make video connections from the VIDEO OUT jack on the player to the VIDEO IN jack on the TV or monitor using the video cord included with the player (page 18).

2When using the VIDEO OUT jack, set VIDEO SELECT to the top position.

3Make audio connections from the AUDIO OUT jacks on the player to the AUDIO IN jacks on the TV or monitor using the stereo audio cord included with the player. Be sure to match the color of the plugs with the color of the jacks (red and white) (page 17).

4After all connections have been made, connect to a power outlet.

15