To confirm the contents of a program

1Press PROGRAM.

2Use PREVIOUS 4 or NEXT ¢ buttons to jump to the next/previous page of six steps (4/¢ on the front panel cannot be used to perform this operation).

3Press PROGRAM to exit the program screen.

To change the contents of a program

1Press PROGRAM.

2Jump to the page of steps with the contents you want to change using the 4/¢ buttons (4/¢ on the front panel cannot be used to perform this operation).

3Move the cursor control joystick up or down to select the step you want to change.

4Move the cursor control joystick right or left to select the appropriate field.

5Press the number button(s) of the number you want to change.

6Press PROGRAM to exit the program screen.

To add to a program

Add a new Disc, Title/Track or Chapter at the end of the program by following the steps in the section "Programming” on the previous page.

To repeat the contents of a program

During program playback, press REPEAT. The entire program will be repeated.

To delete a step in a program

1Press PROGRAM.

2Jump to the page with the contents you want to delete using the 4/¢ buttons (4/¢ on the front panel cannot be used to perform this operation).

3Move the cursor control joystick up or down to select the step you want to delete.

4Press CLEAR.

5Press PROGRAM to exit the program screen.

To clear the entire program

Pressing CLEAR when the disc is stopped will clear all program data.

To stop program play

Press STOP 7.

Notes

•If a chapter is programmed for a disc that has not yet been read by the player (“???” is displayed), and a CD or Video CD is later detected in that disc position, the chapter program information is cleared. Additionally, if there is no disc in the selected disc position, or if the programmed chapter number is larger than the number of chapters in the selected title, the chapter program information is erased.

•During DVD playback, when a chapter that cannot be played as

part of program playback is encountered, or is displayed, and the program automatically proceeds to the next chapter.

•Programming is not possible during PBC playback of Video CDs. To program Video CDs, stop playback before attempting to make a program.

•During programmed playback, if the rack is rotated to play a DVD, an asterisk may be displayed in the upper right corner of the screen. This is to indicate that there is information on the disc that must be played first (First Play PGC). Depending on the disc, the asterisk may blink continuously during playback of chapters that were not programmed and then disappear shortly before playback of the desired location on the disc.