Pioneer DV-535 PP0/DVDCDB, PP1/CRCERRB, DVDD2, Vss Gnd, VSS GND DVDD1, Busyb, Vrpfr, Vpdo Avdd

DV-535

No.	Pin Name	I/O	Pin Function
51	HFLIO	I/O	Mirror detection signal input/output
52	LASER	O	Output pin for laser ON/OFF control
53	PP0/DVD_CDB	I/O	General-purpose port input/output / Disc discrimination signal output
54	PP1/CRCERRB	I/O	General-purpose port input/output / Subcode CRC result signal output
55	FG	I	FG counter input
56	PP2/EVENT	I/O	General-purpose port input/output / Event counter input
57	RESB	I	Reset input
58	CSB	I	Chip select input
59	RDB	I	Internal state reading signal input
60	WRB	I	Command / data writing signal input
61	DVDD2	−	5V power supply
62	VSS	−	GND
63	P0
64	P1
65	P2
66	P3	I/O	Command / data input/output
67	P4
68	P5
69	P6
70	P7
71	VSS	−	GND
72	DVDD1	−	3.3V power supply for internal
73	BUSYB	O	Busy signal output of command process
74	SQOUT	O	Serial output of subcode Q
75	CQCKB	I	Shift clock input for subcode Q data output
76	RWC	I	Update permission input of subcode Q
77	WRQ	O	Read out ready monitor of subcode Q
78	AVSS	−	PLL GND for internal system clock
79	VRPFR	−	VCO oscillation range setting of PLL for system clock
80	VCOC	I	Connect a PLL filter for system clock
81	VPDO	O
82	AVDD	−	PLL 5V power supply for system clock
83	PDO1	I/O	PLL filter connection pin 1 for EFM playback
84	PDO2	I/O	PLL filter connection pin 2 for EFM playback
85	PDO3	I/O	PLL filter connection pin 3 for EFM playback
86	AVSS	−	PLL GND for EFM playback
87	PCKIST1	−	Current setting 1 of PLL constant current charge pump for EFM playback
88	PCKIST2	−	Current setting 2 of PLL constant current charge pump for EFM playback
89	AVDD	−	PLL 5V power supply for EFM playback
90	DVDFR	−	VCO oscillation range setting of PLL for EFM playback 1
91	CDFR	−	VCO oscillation range setting of PLL for EFM playback 2
92	JV	O	Jitter output of PLL clock for EFM playback
93	PCK	O	Bit clock output for EFM playback
94	ADRAO	I	Address input
95	DVDSYEQ	I	DVD synchronize pulse input
96	DVDSYNC	I	DVD synchronous signal input
97	LEFM2	O	Output the state that cut and out a signal which was binary-stated value EFM with PCK 2
98	DVDD1	−	3.3V power supply for I/O
99	VSS	−	GND
100	LEFM	O	Output the state that cut and out a signal which was binary-stated value EFM with PCK 1

63