Initial Settings menu
Parental Lock
•Default level: Off; Default password: none;
Default Country code: us (2119)
To give you some control over what your children watch on your DVD player, some DVD- Video discs feature a Parental Lock level. If your player is set to a lower level than the disc, the disc won’t play.
Some discs also support the Country Code feature. The player does not play certain scenes on these discs, depending on the Country Code you set.
Note
•Not all discs use Parental Lock, and will play without requiring the password first.
•If you forget your password, you’ll need to reset the player to register a new password. (see Resetting the player on page 38)
Registering a new password
You must register a password before you can change the Parental Lock level or enter a Country code.
1Select ‘Option’, then ‘Password’.
2Use the number buttons to enter a 4- digit password.
The numbers you enter show up as asterisks
(*)
3Press ENTER to register the password. You will return to the Options menu screen.
Changing your password
To change your password, confirm your existing password then enter a new one.
07
1Select ‘Password Change’.
2Use the number buttons to enter your existing password, then press ENTER.
3Enter a new password and press ENTER. This registers the new password and you will return to the Options menu screen.
Setting/changing the Parental Lock
1Select ‘Level Change’.
2Use number buttons to enter your password, then press ENTER.
3Select a new level and press ENTER.
• Press | (cursor left) repeatedly to lock | |
more levels (more discs will require the | ||
password); press | (cursor right) to | |
unlock levels. You can’t lock level 1.
This sets the new level and you will return to the Options menu screen.
Setting/changing the Country code
You can find the Country code list on page 40.
1Select ‘Country Code’.
2Use number buttons to enter your password, then press ENTER.
3Select a Country code and press ENTER. There are two ways you can do this:
• Select by code letter: Use | (cursor up/ |
down) to change the Country code. | |
• Select by code number: Press | (cursor |
right) then use the number buttons to enter the
The new Country code is set and you will return to the Options menu screen. Note that the new Country code doesn’t take effect until the next disc is loaded (or the current disc is reloaded).
35
En