Appendix
Additional information
Problem | Check | Remedy |
The player’s power turns off | Is Auto Power Off set to On? | If Auto Power Off is set to On, the player’s |
automatically. |
| power turns off automatically if no operation |
|
| is performed for over 30 minutes (page 32). |
Power turns on or off automati- | Is KURO LINK set to On? | The player’s power may turn on together |
cally. | with the power of the TV connected to the | |
|
| HDMI OUT terminal. If you do not want |
|
| the player’s power to turn on when the TV’s |
|
| power is turned on, set KURO LINK to Off |
|
| (page 32). |
Input of connected TV and AV | Is KURO LINK set to On? | The input of the TV and AV system (AV |
system switches automatically. | receiver or amplifier, etc.) connected to the | |
|
| HDMI OUT terminal may automatically |
|
| switch to the player when playback starts |
|
| on the player or the menu screen (Home |
|
| Menu, etc.) is displayed. If you do not want |
|
| the inputs of the connected TV and AV |
|
| system (AV receiver or amplifier, etc.) to |
|
| switch automatically, set KURO LINK to Off |
|
| (page 32). |
Picture is not displayed. | Is the video cord properly con- | Connect the cord properly, inserting the |
| nected? | plug all the way in. |
| Is the video cord damaged? | If the video cord is damaged, replace it with |
|
| a new cord. |
06
English
| Is the input on the connected TV | Switch to the proper input, referring to the |
| or AV receiver or amplifier properly | connected device’s operating instructions. |
| set? |
|
Picture is stretched, or aspect | Is the aspect ratio properly set on | Refer to the TV’s operating instructions and |
ratio cannot be switched. | the connected TV? | set the TV’s aspect ratio properly. |
| Is TV Screen properly set? | Set TV Screen properly (page 29). |
During playback, picture is | This is not a problem with the | This player supports Macrovision copy |
disturbed or dark. | player. | protection. With some TVs, the picture may |
|
| not display properly when playing discs |
|
| including copy prevention signals. This is |
|
| not a malfunction. |
Are the player and TV connected via a video deck?
When the player and TV are connected via a video deck, the player’s analog copy protect function may cause the picture being played on the video deck not to display properly.
Connect the player and TV directly.
Is the TV system properly set?
The factory default setting is AUTO. If the picture is distorted, switch the TV system to the one used in your country or region (NTSC or PAL) (page 43).
Playback stops momentarily or | Are you playing a disc that was |
the disc is not properly played. | edited on a DVD recorder, etc.? |
When edited images are played, the picture may stop momentarily at points where images were combined, and the disc may not play as edited.
En 35