Pioneer PIONDV320S operating instructions When connected to an HDMI-compatible device DV-420V only

Additional information

Problem	Check	Remedy
DTS audio signals are not	Are connections proper?	Properly connect the AV receiver or ampli-
output.		fier, etc., to the DIGITAL AUDIO OUT
		(COAXIAL/OPTICAL) terminals.

Appendix

06

English

Does the connected AV receiver or	If the connected AV receiver or amplifier,
amplifier, etc., support DTS audio	etc., does not support DTS audio signals, set
signals?	DTS Out to Off (page 28).
Is the audio output properly set	If the connected AV receiver or amplifier,
on the connected AV receiver or	etc., supports DTS audio signals, change
amplifier, etc.?	the audio output of the AV receiver or ampli-
	fier, etc., to a setting allowing output of DTS
	audio signals.

96kHz/88.2 kHz digital audio signals are not output from the

DIGITAL AUDIO OUT (COAXIAL/OPTICAL) termi- nals.

Is 96 kHz PCM Out set to 96kHz?	Set 96 kHz PCM Out to 96kHz > 48kHz.
Are you playing a copyright-pro-	The 96 kHz/88.2 kHz digital audio signals of
tected disc?	copyright-protected discs cannot be output.

Folder or file names are not recognized.

Have you exceeded the maximum number of folder or file names the player can recognize?

Up to 299 folders can be recognized on one disc. Up to 648 files can be recognized within one folder. Depending on the folder structure, however, the player may not be able to recognized certain folders or files.

Folder or file names are not displayed or are not properly displayed.

Do the folder or file names contain anything other than 1-byte alpha- numeric characters?

Folder and file names can be displayed. Note, however, that only 1-byte alphanu- meric characters can be displayed. Folder and file names including characters other than 1-byte alphanumeric characters may be displayed for example as F_001 or FL_001, and the characters may be garbled.

Time is required to play JPEG	Are you playing large files?	Some time may be required to display large
files.		files.
Black bars are displayed when	Are you playing files with different	Black bars may be displayed along the top
playing JPEG files.	aspect ratios?	and bottom or sides when JPEG files with
		different aspect ratios are played.

When connected to an HDMI-compatible device (DV-420V only)

Problem Check Remedy

HDMI indicator does not light. Is a DVI device connected?

The picture may not be output properly when a DVI device is connected.

Is the input properly set on the connected HDMI-compatible device?

Refer to the operating instructions of the connected HDMI-compatible device and switch to the proper input.

En 37