Section
05Changing the Settings (Initial Settings)
Digital Audio Out settings
Options settings | Settings |
|
|
| Multichannel audio signals are converted to |
| LPCM (2CH) | audio signals for output. This can be selected when the connected |
|
| |
HDMI Out |
| Audio signals supported by the connected |
| device (Dolby Digital, DTS, MPEG and linear PCM) are output. | |
| Auto | |
| Audio signals not supported by the connected | |
|
| |
|
| device are converted to linear PCM for output. |
| Off | No audio signals are output from the HDMI OUT terminal. |
The settings can only be changed when the player and
If the connected
Digital Out
On
Off
Audio signals are output from the DIGITAL AUDIO OUT (COAX- IAL/OPTICAL) terminals.
No audio signals are output from the DIGITAL AUDIO OUT (COAXIAL/OPTICAL) terminal.
When Digital Out is set to Off, the audio signals output from the HDMI OUT terminal are converted to linear PCM.
| Dolby Digital | Dolby Digital audio signals are output. Select this when the con‑ | |
| nected AV receiver or amplifier supports Dolby Digital audio. | ||
|
| ||
Dolby Digital Out |
| Dolby Digital audio signals are converted to linear PCM audio | |
| Dolby Digital > PCM | signals for output. Select this when the connected AV receiver or | |
|
| amplifier does not support Dolby Digital audio. | |
| DTS | DTS audio signals are output. Select this when the connected AV | |
| receiver or amplifier supports DTS audio. | ||
DTS Out |
| ||
Off | DTS audio signals are not output. Select this when the connected | ||
| |||
| AV receiver or amplifier does not support DTS audio. | ||
|
|
When the connected AV receiver or amplifier does not support DTS audio, set Off. Noise may be generated if DTS is set.
|
| 96 kHz audio signals are converted to 48 kHz/44.1 kHz audio |
| 96kHz > 48kHz | signals for output. Select this when the connected AV receiver or |
96 kHz PCM Out |
| amplifier does not support 96 kHz audio. |
| 96kHz | 96 kHz audio signals are output. Select this when the connected |
| AV receiver or amplifier supports 96 kHz audio. | |
|
| |
| MPEG | MPEG audio signals are output. Select this when the connected |
| AV receiver or amplifier supports MPEG audio. | |
|
| |
MPEG Out |
| MPEG audio signals are converted to linear PCM audio signals for |
| MPEG > PCM | output. Select this when the connected AV receiver or amplifier |
|
| does not support MPEG audio. |
The factory default settings are indicated in italic.
28En