Pioneer BDP-51FD  About the Hdmi high speed transmission,  About Hdcp,  About Pqls function

Page 15

Audio signals that can be transferred with the player’s HDMI output terminal

•Dolby TrueHD

•Dolby Digital Plus

•Dolby Digital

•DTS-HD Master Audio

•DTS-HD High Resolution Audio

•DTS Digital Surround

•MPEG-2 AAC

•Linear PCM

Linear PCM audio signals meeting the following conditions can be output:

–Sampling frequency: 32 kHz to 192 kHz

–Number of channels: Up to 8 (up to 6 for a 192 kHz sampling frequency)

For details, see About the audio output settings on page 50.

About the HDMI high speed transmission

This player outputs 1080/60p and Deep Color video signals. If your TV supports 1080/60p or Deep Color signals, use a High Speed HDMI™ cable in order to take advantage of the maximum performance the player and TV can offer. Also set HDMI High- Speed Transmission to On (page 41).

High Speed HDMI™ cables are tested to carry signals up to 1080p. 1080/60i, 1080/60p, 1080/24p and 720/60p video signals that are capable of Deep Color can also be carried.

Note

•Set HDMI High-Speed Transmission to Off when using an HDMI cable other than a High Speed HDMI™ cable (a Standard HDMI™ cable).

•The following restrictions apply when HDMI High-Speed Transmission is set to Off:

–Deep Color signals are not output.

–If output video resolution is set to Auto, the signals are output with a resolution of 1080/60i, even if the TV’s preferred resolution is 1080/60p.

–When the output video resolution is set to 480i or 480p, Dolby TrueHD and DTS-HD Master Audio signals are not output as such. They are either output as Dolby Digital or DTS Digital Surround signals or converted into linear PCM. Also, 96 kHz and 192 kHz multi-channel linear PCM audio signals cannot be output. They are output as 2-channel signals (page 50).

•When an HDMI cable with a built-in equalizer is connected, it may not operate properly.

About HDCP

HDCP (High-bandwidth Digital Content Protection) is a copyright protection system by which digital video signals are encrypted.

When connected to a DVI device

•It is not possible to connect DVI devices (computer displays, for example) that are not compatible with HDCP.

•No audio signals are output. Connect using an audio cable (included), etc.

•This player is designed for connection with HDMI-compatible devices. When connected to a DVI device, it may not operate properly depending on the DVI device.

About HDMI Control function

02

 

•When the player is connected to a Pioneer Flat Panel TV or AV system (AV receiver or amplifier, etc.), supporting the HDMI Control function, it can be operated from the Flat Panel TV or AV system (AV receiver or amplifier, etc.).

•The Flat Panel TV’s input is switched automatically when playback is started on the player or the Home Menu or the Home Media Gallery is displayed. When the input is switched, the playback picture, the Home Menu or the Home Media Gallery appears on the Flat Panel TV (Auto-select function). If the Flat Panel TV’s power is being turned off at this time, it may turn on automatically (Simultaneous power function). When the language information from a connected Flat Panel TV is received, you can have the player’s on-screen display language change automatically to that of the Flat Panel TV (Unified language function). This function is available only when playback is stopped and the menu screen is not displayed.

•Also refer to the operating instructions of the Flat Panel TV or AV system (AV receiver or amplifier, etc.).

To use the HDMI Control function

•The HDMI Control function only works when outputting video signals from the HDMI terminal.

•The HDMI Control function operates when HDMI Control is set to On for all devices connected with HDMI cables. Once connections and the settings of all the devices are finished, be sure to check that the player’s picture is output to the Flat Panel TV. (Also check after changing the connected devices and reconnecting HDMI cables.) The HDMI Control function may not operate properly if the player’s picture is not properly output to the Flat Panel TV.

•Use High Speed HDMI™ cables when using the HDMI Control function. The HDMI Control function may not operate properly if other HDMI cables are used.

•The function name of KURO LINK used on the web and in catalogs is referred to as HDMI Control in the operating instructions and on the player.

About PQLS function

The PQLS (Precision Quartz Lock System) is a transfer control technology using the HDMI Control function. The player’s output signals are controlled from the AV receiver or amplifier to achieve high quality sound playback using the quartz oscillator of AV receiver or amplifier. This eliminates the influence of the jitter generated upon transfer which can adversely affect the sound quality.

•The PQLS function is only activated when the player is connected to a Pioneer AV receiver or amplifier compatible with the PQLS function via HDMI connection.

•The PQLS function is only activated when playing a music CD (CD-DA).

•The PQLS function is activated when the player is set as follows (page 41):

HDMI Control: On

PQLS: Auto

•Also refer to the operating instructions of AV receiver or amplifier.

Caution

•If the output video resolution is switched when playing a music CD (CD-DA), the PQLS function does not work. This function will work again after playback stops and restarts.

15

En

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Blu-ray Disc Player D3-4-2-1-1En-A Thank you for buying this Pioneer product Operating Environment        Information courtesy of the Deafness Research Foundation To establish a safe levelContents Open the rear cover Putting the batteries in the remote controlWhat’s in the box Close the rear coverDVD-Video Types of discs/files that can be playedPlayable discs Logo Application format Disc type Discs that cannot be played  About audio formats Playing BDs Playable files Part Names and Functions Front Panel Rear Panel Connecting a TV Connecting using a commercially available Hdmi cable About Hdmi  About Hdmi Control function  When connected to a DVI device About the Hdmi high speed transmission  About HdcpCenter Connecting using the included audio cable and video cableConnecting using a commercially 02 available Hdmi cable Connecting an AV receiver or amplifierConnecting using audio cables Connecting the power Cord Turn on the TV’s power and switch the input Making settings using the Setup Navigator menu If the Setup Navigator menu is not displayed Turn on the power. Press  STANDBY/ONOutput test tones Check the settingsProceed to step Select Proceed, then press EnterOperating the TV with the player’s remote control TV Preset code list About the screen saver Select and set the item  To close the Tools menu Tools menu item list Display the Tools menuUse / to select Bdmv Data Erase, then press Enter Switching the video output terminalErasing the additional data from BD-ROMs With no disc loaded, press the Tools button To output film material Switching the output video resolution Press Output Resolution  About Film material To resume normal playback Playing discs or filesForward and reverse scanning  If the disc menu is displayedSkipping content Playing specific titles, chapters or tracksStep forward and step reverse  Turning the subtitles off Switching the camera anglesSwitching the subtitles Switching the audio streams/ channelsUsing the Play Mode functions Switching the secondary videoPlaying from a specific time Time Search  To cancel Time Search  To cancel the searchPlaying a specific title, chapter or track Search Select A-B Repeat  To cancel A-B Repeat play To cancel Repeat Play Playing repeatedly Repeat Play To cancel Random Play Playing in random order Random PlaySelect the Random Play Disc/file type Play Mode type Mark1 Repeat play Random Search playMusic file  Closing the Home Media Gallery Playing from the Home Media GalleryPlaying discs Playing music filesSelect Folders or All Songs Playing in the desired order HMG Playlist Adding tracks/files Select Music. Press Enter Deleting tracks/files from the HMG Playlist  Playing the HMG Playlist When Memory1, 2 or 3 is selected Adjusting the video Closing the Audio DRC screen Adjusting the Audio DRC05  Closing the Video Adjust screen  About Pure CinemaSelect and set Initial Setup Changing the settings Initial SetupOperating the Initial Setup screen  Closing the Initial Setup screenOptions Explanation Subtitle Language Setting Options ExplanationOff EnglishOptionsExplanation  Closing the speaker settings screen Changing to other language at language settingChanging the speaker setup  To change the language using numbersSelect and set Parental Lock Registering or Changing the passwordAdjust the output level  Closing the Channel Level screen To change the code number Input the passwordRe-input the password Changing the Age Restriction for 06 watching BD-ROMsChange the age Changing the Parental Lock level for watching DVDsChanging the Country/Area code Change the levelUse / to change, then press Enter to set Select and set Options  To change the country/area code using numbersChange the country/area code Set the video and audio terminals to be usedRestoring all the settings to the factory default settings Audio 4,5 About the audio output settingsRatio is set to 43 Standard TroubleshootingProblem Check Remedy PlaybackTerminal Priority. Set Output Terminal Priority properly OUT COAXIAL/OPTICAL terminal?Set Hdmi Audio Out to PCM When connected using an Hdmi cableAre Audio Output Mode and Speaker Setup properly set? OUT output CoaxialHdmi cable? Output video resolutionConnected using an Hdmi cable Connecting and/or disconnecting Hdmi cables. IfSet Hybrid Disc Playback to CD Is Auto Power Off set to On?Others Control in terminalLanguage Code Table and Country/Area Code Table Language Code TableCountry/Area Code Table Specifications Cleaning the pickup lens Place of installationTurn the power off when not using the player Cleaning the player Condensation on discs  Cleaning discs Storing discs  Specially shaped discs Dolby Digital  DTS-HD High Resolution Audio Hdcp High-bandwidth Digital Content Protection 07  Deep Color Subtitle language  S-Video output Secondary audio  Secondary video zlib  FreeType2 Licenses libxml2  OpenSSL libpng References  libjpgReferences  GNU General Public License No Warranty  GNU Lesser General Public License Page How to Apply These Terms to Your New Libraries Page Pioneer Corporation
Related manuals
Manual 72 pages 42.47 Kb
Top Page Image Contents