GETTING STARTED
Using the Battery Pack (DC)
The rechargeable battery pack can be used for approximately 300
The battery should be charged fully (minimum 4 hours) before its initial use to ensure optimum lifetime performance.
To install the battery pack:
1.Place the battery pack into it’s cradle
located on the bottom of the player.
2. Slide the battery in until it clicks into place..
3. To release the battery, press the battery release button and slide the battery out.
To charge the battery pack:
1.Install the battery in the manner de- scribed above.
2.Connect the player’s
power source with the AC/DC adapter as described previously. (The Battery Charge indicator will light red while it is charging; it will light green when the bat-
tery is fully charged.) |
|
| |
When the battery charge level is | 7.4V 3000mA/h |
low, the unit will enter STANDBY |
|
mode automatically. |
|
Power Management
If the player will not be in use for a long period of time, set the Power Switch to the OFF position, remove the battery, and unplug the player.
Page 16 | Coby Electronics Corporation |
|
|