Toshiba SD-V593SU owner manual To ADD/DELETE channels Noise elimination, To delete channels

0–9

ENTER

SET +/–

VCR MENU

To ADD/DELETE channels Noise elimination

1 Repeat the step 1 on page 30. Then￿￿￿￿￿￿￿￿press SET + or

– to select the “ADD/DELETE” and￿￿￿￿press￿￿￿￿￿￿￿￿ENTER.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2 To Add or Delete desired channels

1) Press Direct channel selection buttons (0–9) or SET +/– to select a channel number you want to add or delete.

2) To add channels

Press ENTER until “ADD” appears on the screen.

To delete channels

Press ENTER until “DELETE” appears on the screen. The channel number will blink

3) Repeat 1) to 2) to add or delete￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿other channel￿￿.￿￿￿

When you don't want to receive a weak signal broadcast, a Blue back screen can be obtained by selecting the NO NOISE BACK- GROUND “ON”. When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to “ON”.

1 Repeat the steps 1~2 on page 29￿￿￿￿and￿￿￿￿￿press SET￿￿

+ or – to select “NO NOISE BACKGROUND”￿￿￿￿￿￿￿￿￿￿￿.

￿￿￿￿￿

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

2 Press ENTER to select “ON” or “OFF”￿￿￿￿￿￿￿￿￿￿position.￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

3 Press VCR MENU until the menu screen is cleared.

Basic setup

3 Press VCR MENU until the menu screen is cleared.

31

2F90201A (E)p29-34 31 4/4/05, 9:02 PM