Cambridge Audio 540D V2 user manual Remote control

Page 7

azur 540D V2

Remote control

The 540D V2 is supplied with an Azur Navigator remote control. Insert the 3 supplied AAA batteries to activate. For further details of the various adjustment functions available, refer to the later sections of this manual.

Open/Close

Opens and closes the disc tray.

Standby/On

Switches the unit between On and Standby mode.

Numerical buttons

Press the number of a desired chapter or track to go directly to it. For a number greater than ten, press 10+ followed by the number(s) required.

Go To

Press once to access Chapter Selection then enter the required chapter via the numerical buttons. Press twice to access Disc Time Selection and enter the required time from the start of the disc as H:MM:SS (Hours, Minutes, Seconds). Press three times to access Chapter Time Selection and enter the required time from the start of the chapter.

Repeat

Press to repeatedly play a single chapter/title on a DVD video or a single track/entire disc on a CD. The first press selects chapter/track repeat, the second press selects title/disc repeat, the third press selects all repeat.

A-B

Press to mark a segment between A and B for repeated playback. The first press marks point A, the second press marks point B.

Return

Press to return to the previous operation in any setup menu.

Disc Menu

Press to go to a DVD disc’s own setup menu.

Setup

Press to enter the 540D V2's Setup menu. Please refer to the ‘DVD player setup’ section of this manual for more information.

Info

While playing a DVD, press to cycle through the following information options to be displayed on the screen: Title Elapsed, Title Remain, Chapter Elapsed, Chapter Remain, Info Off.

Disc Title

Press to access the DVDs Title Menu. This is usually the root menu from where the film can be started or where navigation to scene selections, special features etc can be made.

Navigation

Press the directional arrows to move around the Setup menus.

Enter

Press to accept the item/function highlighted in the display menu.

Play / Stop / Pause

Press the relevant button to play, stop or pause playback.

Go To

Repeat

A-B

 

Disc

Setup

Info

Disc

Menu

Title

 

 

Enter

Slow

Audio Sub Angle Zoom

Amp / AVR

Source

Vol

Vol

DVD

Note: If Stop is pressed once playback can be resumed from the same place by pressing Play. Press Stop twice to completely stop playback. If Pause is selected pressing the Slow key then allows frame by frame advancement of the paused frame.

Slow

When playing a DVD, press repeatedly to cycle round the various speeds of slow motion, forwards and backwards and back to normal speed).

Search

Press repeatedly to cycle between 2X, 4X, 8X and 16X playback speed (without sound) and back to normal playback. Left button for backwards playback options, right button for forwards playback.

Skip

Right Skip - Press once to skip forward by one track/chapter on the disc. Press and hold to skip forwards through several tracks.

Left Skip - Press once to skip backward by one track/chapter on the disc. Press and hold to skip backwards through several tracks.

Audio

Press to access alternate audio soundtracks on the DVD (if available on the DVD disc).

Sub

Press to enable/disable Subtitles (if available on the DVD disc).

Angle

Press to access various camera angles (if available on the DVD disc).

Zoom

Press to cycle through the various zoom magnifications (and back to normal display).

Amp/AVR buttons

The 540D V2 remote also has buttons that allow control of a Cambridge Audio Azur Amplifier or AV Receiver.

Note: These buttons are default set to transmit codes for our Azur 540R AV Receiver. To set the remote to an Azur 640R instead, simply remove the batteries, leave the remote for a few minutes and then hold down the Source button whilst re-inserting the batteries. To control an Azur 540A/640A/740A/840A follow the same steps as before, but hold down the Standby/On/Mute button.

The functions relevant to the amplifier or AV Receiver chosen are as follows:

Source

Press repeatedly to scroll round the source inputs one by one.

Standby/On / Mute

Press to switch the amplifier/AV Receiver between Standby mode and On. Press and hold to mute/un-mute the amplifier/AV Receiver.

Volume

Press to decrease or increase the volume of the amplifier/AV Receiver.

ENGLISH

7

Image 7
Contents Azur 540D Introduction ContentsPlug Fitting Instructions UK Only Limited warrantySafety precautions Checking the Power Supply RatingImportant safety instructions Rear panel connections Front panel display Front panel controlsRemote control Digital audio Audio connectionsAnalog stereo AnalogHdmi connections Analog video connectionsDolby Digital Surround-sound formatsVideo formats Dolby Digital EXVideo Setup menu DVD player setupTV Display Angle Mark Hdmi SetupTV Type Scart / ComponentAudio setup menus Hdmi Audio Audio Setup menuDolby Digital Setup menus Channel DelaySubtitle PasswordDefault Preference menuSkip playback Basic operating instructionsDivX/MP4 playback Getting startedTechnical specifications Custom installation C.I. useTroubleshooting AP20597/1