Bose 3.2.1 manual Remote issues What to do

English

DeutschEspañol FrançaisItliano Nederlands Svenska

REFERENCE

System issues		What to do
No sound from TV only	•	If your TV has Variable instead of Fixed audio output, you need to turn off the TV speakers internally.
		Refer to your TV owner’s guide and follow the instructions provided there.
Speech and lip movement on	•	Adjust the Audio Delay using the Settings menu on screen. For details, refer to “Choosing new settings”
screen are not in sync		on page 53.
Radio does not work or has	•	Make sure the antennas are connected and positioned as shown in “Installing the FM and AM radio
poor reception		antennas” on page 25.
	•	Adjust the FM antenna position to reduce interference.
	•	Move antennas farther from the media center, TV, or other electronic equipment.
	•	Select another station. You may be in an area of weak signal coverage for some stations.
Volume level changes when	•	Change the Audio Level for the source input so its volume matches the volume of the radio and DVD in
another sound source is		the Bose® system. Refer to “Audio options” on page 49.
selected

Remote issues		What to do
3•2•1® remote does not	•	Make sure that the remote is set to control the component. Refer to “Setting the remote for your TV” on
control your TV, CBL•SAT, or		page 31.
AUX component	•	Make sure that the front of the component is not obstructed.
	•	Reset the remote using a different device code for the component you want to control. Refer to “Device
		codes” located at the back of the book. There may be several codes that can turn the component on
		and off, but only one that provides further control (channel changing, for example).
3•2•1 remote behaves	•	Aim the remote at the front of the media center.
erratically or does not work	•	Make sure the battery polarity (+ and –) matches the polarity marked in the battery compartment.
	•	Install new batteries. Refer to “Replacing remote batteries” on page 59.

61