Bose 3.2.1 manual Video issues What to do

Page 66

Svenska

Nederlands

FrançaisItliano

DeutschEspañol

English

REFERENCE

Video issues

 

What to do

 

 

 

Sound, but no picture

Make sure the TV is on.

 

Make sure the TV is set to the correct Video Input to see the video from DVDs on the Bose® system.

 

Make sure a DVD is in the disc tray.

 

If the TV is connected to the media center using the HDMI cable:

 

 

– Switch from one Video Input to another and then back to the original input.

 

 

– Turn everything off, then:

 

 

A. Turn on the TV and set the TV Video Input for the Bose system video.

 

 

B. Turn on the 3•2•1® system and press DVD.

 

 

– Turn off both the TV and the 3•2•1 system and then:

 

 

A. Unplug the HDMI cable from both ends.

 

 

B. Disconnect the power cables from both your TV and the 3•2•1 Acoustimass® module.

 

 

C. Re-connect power to the television and to the Acoustimass module.

 

 

D. When the 3•2•1 startup message disappears from the display, re-connect the HDMI cable.

 

 

E. Turn on the TV first, then turn on the 3•2•1 system.

 

 

– Disconnect the HDMI cable that connects the TV to the 3•2•1 media center. Reconnect the two using

 

 

a Component cable, an S-Video cable, or the Composite cable provided with the system.

 

 

 

Incorrect picture

Make sure the TV is set to the correct Video Input.

for the selected source

 

 

 

 

 

Picture is black and white,

Check the video cable connections.

flickers, gets dark, or rolls

If the media center is connected to the TV using a Component cable, make sure the colored cable plugs

 

 

(red, green, and blue) match the connector colors on the media center and on the TV.

 

Check the Video Format setting (NTSC or PAL) and change it.

 

 

Refer to “Video options” on page 50.

 

 

 

Picture is not clear or is

Use the Settings menu to lower the output resolution of the system. Your 3•2•1 system sets its DVD video

unstable

 

resolution to match the default that is communicated to it by the TV. You can experiment with other set-

 

 

tings to see which one provides the best picture.

 

HDTVs can accept different resolutions as input, and in some cases the highest number does not result in

 

the best picture.

 

 

 

62

Image 66
Contents GS Series III 321 Series Safety Information Contents Introduction Copyright and License Protections Device Codes Page Before you begin For your records Unpacking Acoustimass module Speaker cable Placing Thecomponentssystem Setup Connecting Speakers to the module Fastener screws Connecting Module to the media center English DeutschEspañol FrançaisItliano Nederlands Svenska Connecting System video to your TV Check to see if your TV has an unused Hdmi TV with Hdmi TV without Hdmi Video pass through on page 21 for further information Connecting Cable box or othercomponent Svenska Nederlands To connect another component To get digital audio from the component To use video pass through Connecting audio From your TV as an option Be sure to match red to red and white to white White plug Red plug Installing FM and AM Radio antennas Svenska Nederlands English DeutschEspañol FrançaisItliano Nederlands Svenska Connecting Module to a power outlet Continue with 9 on the next Setting the remote To control your TV and components Inserting the remote batteriesSetting the remote for your TV Controlling another component Point the 321 remote at yourTrying out the DVD Remote control Cddvd Fmam Cblsat AUXPower and source buttons Menu and movement buttons Play and numeric buttons Record and A, B, C buttons not in Europe Colored buttons in Europe onlyDisplay Media centerControl buttons Disc trayPlaying a video disc or CD Selecting a play optionKeeping your discs clean For DVDs Setting Parental Control Checking for disc compatibilityMature teenage audiences Adult audiencesMature audiences Mature young audiencesAdjusting for audio delay Playing a cable box or other componentGetting digital audio from a source Choosing other optionsCreating a preset Removing a station from a presetListening to the radio Changing system features To get to the System menuSelecting a new option Audio options TV StereoVideo options YesOnly an indicator OffMedia center options CblsatChoosing new settings To get to the Settings menuSettings options Features Default Setting Effect OptionsAvailable only if a dual 000 For CD only For FM and only on Cleaning the media center Cleaning the speakersTroubleshooting Remote issues What to do Video issues What to do For customer service Maximum ambient temperature Power ratingDimensions WeightsGlossary Glossary English DeutschEspañol FrançaisItliano Nederlands Svenska Svenska Nederlands DeutschEspañol Device Codes AEG AOCBPL CCECTC DECEmperor 0282 Envision Elite 00370178 Enzer 0753 EpsonHCM ICEJNC JCBJIL KDSLenoir 0009 Lesa 0247 Lexsor 1196 Leyco 0037 Megapower 0700 Megas 0610 MegatronLenco Liesenk & Tter 0037 LiesenkotterNTC Oso 0218 Osume Phase 0032Powerpoint 0157RCA SEG SKYTCM TML BCC GMINSC KNCNEC UPCCNS JSR FMDHTS JVCNeotion QNSZWO SCS UEC UsdtvAMW Cavs DCEECC JDV JBLJDB JMBMBO NfrenQonix Wize ABSDSE GBC GECHI-Q NAD NAPSBR SEISilva 0037 Silver 0278 SilverCrest 0642 Singer 0347Siera 0081 Signature Smaragd 0348DLO Page