Bose AM259777 manual Placing your speakers, Left and right front speaker placement

Page 7

System Installation Instructions

Placing your speakers

When you place your speakers according to the guidelines below, a combination of reflected and direct sound provides the audio atmosphere of a home theater. You may experiment with the placement and orientation of the speakers to produce the sound most pleasing to you.

CAUTION: Choose a stable and level surface for your speakers. Vibration can cause the speakers to move, particularly on smooth surfaces like marble, glass, or highly polished wood. If you are placing the center speaker on top of the television, attach the rubber feet provided to the bottom of the speaker. You may obtain additional rubber feet by contacting Bose® customer service. Refer to the Bose address list included with your system.

Note: Do not place a cube speaker on its side, as this diminishes performance.

2

Figure 3

Recommended speaker locations

Left and right front speaker placement

To best match sound and picture, the left and right front speakers should be placed at the edge of the TV picture (Figure 3).

Place the speakers up to 3 feet (1 m) from the edge of the TV screen and line them up with the center of the TV screen.

Bose recommends a maximum distance of 3 feet (1 m) from the edge of the TV screen so that the sound does not become too separated from the picture. You may wish to vary this distance based on room conditions and personal preference. The front cables allow the cube speakers to be placed up to 20 feet (6.1 m) from the Acoustimass® module.

Direct one cube of each speaker array forward. Direct the other cube toward the wall or in a different direction to create reflected sound. See the illustration of reflected sound patterns in Figure 4 on page 8.

Left Center front

Left surround

Right

front

Right surround

7

AM259777_02_V.pdf • April 23, 2002

Image 7
Contents Lifestyle DVD Home Entertainment Systems Installation GuideFor your records Safety InformationContents Region numbers Symbols used in this guideIntroduction WelcomeSystem connection diagram System InstallationGetting started Cables and accessories System Installation InstructionsCables and accessories Included with your system Placing your speakers Left and right front speaker placementRecommended speaker locations Left Center speaker placementSurround speaker placement Speaker placement and reflection raysRight and wrong place- ments for the Acoustimass module Acoustimass module placementCenter Front features of mediaPlacing your media center Front door Make sure you haveTerminal tab Red + wire Connecting the speakers to the Acoustimass moduleMaking a two-wire speaker connection Two-wire connection type speakerFront speakers Surround speakers Left Center Right Making a plug-in cable speaker connectionAcoustimass module Connector panel Connecting the Acoustimass module to the media centerAudio input cable Connecting to a cable radio provider Connecting the antennasConnecting an FM antenna Connecting the AM antennaMaking audio connections Connecting your TV to the systemMaking video connections Component video adapter connections Connecting your VCR to the system optionalBox connector Connecting your cable/satellite box to the system optionalCable/satellite box On your TV Installing the TV on/off detector optionalTV on/off detector installed Turning off the internal speakers in your TVConnector panel Power switch Connecting the system to powerHeadset connection for use in the final setup steps Power connection of the Acoustimass modulePower connection of the media center Installing the remote control batteriesRemote control battery installation Contents of the small car- ton Finishing the installationTo get started Save the headset for possible future use To play VCR audio not TV audio through your system Using alternate system connectionsDiagram of a typical system ReferenceAUX left & right audio if available How do I set up a speaker system in a second zone? Setting up a second listening zoneWhat is a zone? What do I need for setting up a second zone?Record/playback connec- tions Connecting external equipmentConnecting record/playback equipment Media center connector panelAUX input connections Using digital audio connectionsUsing optical digital audio connections Connecting other playback equipmentContacting customer service Connecting the optional IR emitter cableAccessories WarrantyTechnical information Page