Beko DVD 2008 manual Connecting to an Interlaced Scanning TV, Component Video Output

Connecting to a TV Connect the DVD player to a TV.

Connecting to an Interlaced Scanning TV

COMPONENT VIDEO OUTPUT

MODEL:SH318H

COMPOSITE VIDEO OUTPUT

AUDIO OUTPUT (R)

AUDIO OUTPUT (L)

S-VIDEO OUTPUT

TV

Notes:

(1)If the TV has component video input (YcbCr/YPbPr) jacks, you can connect them to the YcbCr/YPbPr jacks of the DVD player to get a clearer picture, and use these jacks rather than the S-VIDEO OUTPUT jack.

(2)DVD player setup: (Setup the DVD player according to the connected TV.)

If the TV system is PAL, select PAL output.

If the TV system is NTSC, select NTSC output.

Connect the DVD player to the wide screen TV,

set the “TV TYPE” as“16:9 ” in FUNCTION SETUP.

If the DVD player is connected to an ordinary TV, set the “TV TYPE” to “4：3 PS” or “4：3 LB” in FUNCTION SETUP.

10