Function Setup
Press the SETUP button, the following graphic will display on the screen.
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
1.Press the SETUP menu to enter the setup menu.
2.Use the 
/ 
button to choose the menu item you want to change, then press ENTER to confirm it.
3.Use the 
button to move the high light icon to the right side item.
4.Use the up/down button to change the current setup, then press the ENTER button to confirm it.
5.Use the
button to move the high light icon to the left side item. 6.Select the EXIT SETUP item or press the SETUP button to quit
the setup menu.
SYSTEM SETUP
| SYSTEM SETUP | |
TV SYSTEM >> |
| NTSC |
|
| PAL |
|
| AUTO |
SCREEN SAVER >> |
| ON |
|
| OFF |
VIDEO >> |
| INTERLACE - YUV |
|
| |
|
| |
|
| |
TV TYPE >> |
| 4:3 PS |
|
| 4:3 LB |
|
| 16:9 |
PASSWORD >> |
| －－－－－ |
RATING >> |
| NO ADULT |
|
| KID SAFE |
|
| VIEW ALL |
DEFAULT >> |
| RESTORE |
EXIT SETUP |
|
|
TV SYSTEM
the TV output mode can be : NTSC , PAL or AUTO . Set
up the system of your DVD player to match the system of your TV .
SCREEN SAVER
When in ON mode , if you do not make any operation or are in stop mode for 3 minutes , the screen saver picture will appear.
20
VIDEO
Video setup has four options . If using INTERLACE- YUV output to TV , choose
TV TYPE
4:3(PS)- 4:3 subtitle block to view the full width of the broad mode
PASSWORD
The default mode is set at LOCK , you cannot change the RATING , and cannot change the password in this state. Factory setup(password 0000)
If you want to change the RATING grade or the password, please input the initial password 0000 to unlock , and press the ENTER button first . Thereafter input your new password and enter the ENTER button. If later on you want to make a new setting for the RATING. And you want to change the password , please input the new password as set above . If you input 0000,it will also work.
Important:
Please remember to write down the new password and keep it in a safe place(Ex.behind the remote control battery cover).
The parent lock function will only work on DVD discs with parental control marks
RATING
There are three grade ratings . The performance of this function will depend on the discs
DEFAULT
The default is to change your setup state to the factory default setup