DVD Playback Operation
Preparation After connections, turn on the unit and select the relevant video input before playback.
Disc Loading Steps:
1.Press the POWER button to turn on the power. Press the SOURCE button to shift to DVD mode.
2.Handing the disc with its printed side outward vertically to the disc tray. (Refer to the below picture.)
3.Slightly put the disc into the disc tray.
4.As disc is automatically taken in the disc tray fully, the player will search a disc and play it automatically in DVD mode.
Warning: Do not play poor quality discs that may damage the player’s lens.
DVD Playback
Auto DVD Function
Whether it is in DVD mode, when inserting disc into the disc tray, it will shift to DVD mode and start playback automatically, and when ejecting the disc out, it will return to the prior mode automatically (except the prior mode is DVD mode).
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If the codes don’t match, the disc cannot be played. This player’s default code is region 1.
Play
Press the PLAY button to start playback. Press the STOP button once on the remote control to stop playback, and press the PLAY button again to resume playback.
- 28 -