Firewire DVD/CDRW Installation
For Win98SE, ME and Win2000
(Note for Win98SE only: After plugging in the cable some system might prompt you for Win98SE CD, in case you don’t have The Win98SE CD and the wizard prompt you for
a.NTMAP.SYS please type C:\WINDOWS\SYSTEM32\DRIVERS
b.NTMAPHLP.PDR please type C:\WINDOWS\SYSTEM\IOSUBSYS IF the system did not prompt you for anything just follow the steps below)
1.Make sure the Firewire cable is securely attach from the back of the drive.
2.Make sure that power is attached and turned on.
3.Power on the system, on the Window Desktop, double click on the MY COMPUTER icon.
4.Plug the Addonics Six Pin
5.Plug the Six Pin Male Firewire cable from your computer to the Six Pin Female Daisy Chain port of Addonics Firewire cable shown on Diagram 1.
6.Wait for a few seconds, your computer may blink for a moment as well.
7.Double Click on the “My Computer” icon if not open yet. Your Mobile CDRW will appear as a CD drive icon. You are now ready to use the CDRW Drive.
Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0 | 6 |