CardBus / Pcmcia setting

The Addonics CardBus PCMCIA card has an option switch can allow you to choose using either PCMCIA mode or CardBus mode. The switch position is as follows:

CardBus PCMCIA

Front view

Factory default setting is CardBus mode

Side View

Cardbus and PCMCIA selection switch.

CardBus mode – move the

switch to the side with the

DOT indicator

CardBus mode currently supports WIN 95/98/ME/2000 only. For DOS, WIN 3.1x and WIN NT, the switch must be set in PCMCIA mode.

For Power Installation please refer to Diagram 2 from page5

Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0