USB 2.0 Cable Installation

Attach the USB-IDE cable’s “MC 36 Connector” to your Addonics Mobile Drive firm and securely – you should not be able to disconnect the cable without pressing the release notch.

USB drivers Installation

For Win98 and Win98SE

For Power Installation please refer to Diagram 2 from page5

1.Make sure your computer is up and running

2.Verify that all cables are connected and there is power to the drive.

3.Insert the USB cable to the USB Port.

4.A "New Hardware Found" message shall pops up.

5.Follow the ON SCREEN wizard and point to the location of A:\USBWIN98 for the driver or insert the driver disc, go to driver’s section, click on the USB2 driver to install.

6.Let Windows finish the installation and that’s it.

7.Double click My Computer icon and see if you have an extra drive letter for the drive.

8.You may now access the drive.

For Windows Me, 2000 and XP

There are NO additional drivers required

Addonics Technologies Mobile DVDR/RW manual USB 2.0 Cable Installation, For Win98 and Win98SE