Addonics Technologies Mobile DVDR/RW manual

Page 9

CardBus/PCMCIA driver Installation

For Windows 95, 98, 98SE and Me

(Do not run the SETUP program from the driver disk, SETUP Is for DOS or WIN 3.1 using PCMCIA mode only)

1.Power on your system and wait for the Desktop screen.

2.Connect the CardBus/PCMCIA cable and external AC/DC adapter into the back of your Mobile DVD/CDRW.

3.Plug the CardBus / PCMCIA card end of the cable into the PCMCIA slot on the side of your computer.

4.The system will automatically identify the new card and ask to load the driver.

5.Insert the driver diskette in “A” drive and follow the instruction on the screen to load “Addonics CardBus IDE Controller”. Be sure to

select the A:/win9xMe folder when the system prompts for the location of driver disk.

6.When installation is finished, a PCMCIA card icon will appear in the lower right-hand of the Window’s system tray.

7.Double Click on the “My Computer” icon. Your Mobile DVD±R/RW will appear as a CD drive icon. You are now ready to use the Mobile DVD±R/RW drive.

Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0

8

Image 9
Contents Addonics FCC Warning Statement Contents Physical Characteristics FeaturesChapter Preface General InformationSonic MyDVD Software Getting StartedHardware Installation Fire wire Cable InstallationPage CardBus / Pcmcia setting Page CardBus/PCMCIA Installation for Windows Pcmcia Installation for Windows NTAddonics Technologies Mobile DVD±R/RW Users Guide v Search For Win98 and Win98SE USB 2.0 Cable InstallationSerial ATA Cable Installation Chapter Playing Audio CDs Power DVD Software installationContact Information Technical Support