Connecting to a DTS Receiver/Decoder

Getting Started

FL	FR	SUB	Y	Cb	Cr	VIDEO
SL	SR	CENTER	L	R	COAXIAL	S-VIDEO	OPTICAL

-OR-

DTS DECODER/RECEIVER

Using either an RCA-ended COAXIAL cable suited for digital audio use or an OPTICAL cable, connect one end to the appropriate jack on the DVX-680K (Coaxial or Optical) and the other end to the appropriate jack on the DTS receiver (Coaxial or Optical). If you have both coaxial and optical inputs on your DTS decoder/receiver, it is recommended to use an optical connection as those cables eliminate the possibility of EMI (electromagnetic interference). If your DTS receiver does not have a built-in DTS decoder, and has 5.1 channel RCA inputs, you can use the 5.1 channel output jacks on the DVX-580G. Either method will provide for DTS decoding. Refer to PREFRENCES, page 19, #5 for instructions on setting VIDEO OUTPUT.

SUB

VIDEO

SR CENTER

COAXIAL S-VIDEO

OPTICAL

DOLBY DTS/AC-3 RECEIVER

and

Connecting both Analog and Digital Audio

To do this you will need a Dolby Digital DTS/AC-3 receiver with analog audio inputs. Use optical for video and digital audio and L/R RCA audio for Karaoke features.

VGA

SCART OUT

HDTV/VIDEO MONITOR

Connecting to European TV systems using SCART cable

You can connect directly to a European TV system using the SCART OUT on the DVX-680K. Be sure to refer to PREFRENCES, page 19, #5 for instructions on setting