Image enlargement Zoom, Programme window

Image enlargement (Zoom)

Note:

This function may not be available on all DVDs! If you attempt to execute

a function that is not available, the symbol is displayed on the television screen.

During the playback of an inserted DVD/VCD/S-VCD you can enlarge the image on the television screen in three levels. For this press the ZOOM button on the remote control to set the following enlargement levels:

Change playback language

Note:

This function may not be available on all DVDs! If you attempt to execute a

function that is not available, the symbol is displayed on the television screen.

With many films on DVD you can, during playback, select another playback language by pressing the AUDIO button on the remote control.

The first press of the AUDIO button switches to the first available playback language. With each further press of the AUDIO button other available playback languages, one after the other, are switched on.

The currently switched on playback language will be superimposed on the television screen.

With the control buttons sections of the enlargement can be suspended.

To switch off the enlargement function and return to the normal image size press repeatedly the ZOOM button.

Change camera aspect (ANGLE)

Note:

This function may not be available on all DVDs! If you attempt to execute

a function that is not available, the symbol is displayed on the television screen.

Many films on DVD contain chapters which were recorded simultaneously from various camera perspectives. With films that have such chapters available you can view the same chapter from different perspectives.

Programmed playback (PROG)

Note:

This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt

to execute a function that is not available, the symbol is displayed on the television screen.

With the "Programme" function you can put together your own film programme in so far as you can select only certain chapters of an inserted DVD/VCD/S-VCD for playback. In this way you can determine for yourself the sequence, in which the chapters are played back. You can compile a maximum of 20 chapters of a film for programmed play.

•Press the PROG button on the remote control during playback or when playback is stopped.

The Programme menu will be displayed on the television screen.

For this press the ANGLE button on the remote control during playback of an inserted DVD. Each press of the ANGLE button will switch to one of the available camera perspectives.

Superimpose/fade out subtitles

Note:

This function may not be available on all DVDs! If you attempt to execute

a function that is not available, the symbol is displayed on the television screen.

Programme window

2TT: CH:

3TT: CH:

4TT: CH:

5TT: CH:

EXIT

TT: CH:

If the film on the inserted DVD has subtitles available you can superimpose these on the television screen during playback by pressing the SUBTITLE button on the remote control.

With the first press of the SUBTITLE button the subtitle of the first available language will be superimposed on the television screen. With each further press of the SUBTITLE button the subtitles of other available languages will be superimposed successively on the television screen.

The number of the currently superimposed subtitle language will be superimposed on the television screen ( i.e. 1/10 for the first of ten available subtitle languages).

When the last of the available subtitle languages is superimposed (i.e. 10/10 for the tenth of ten available subtitle languages) you can switch off the subtitle function by pressing the SUBTITLE button again. OFF is superimposed on the te- levision screen.

First are listed the programme positions 1-10, programme position 1 is highlighted.

1.With the number buttons enter the number of the title that is to be played back first. The highlight changes to chapter entry (CH:).

2.With the number buttons enter the number of the chapter that is to be played back. The highlighting moves to the programme position 2.

3.Select, with the navigation buttons , further programme positions and enter title and chapter numbers for the programme positions.

• To display the next 10 programme positions select, with the navigation

buttons , the fieldand press the ENTER button. You can allocate up to 20 programme positions.

•To delete entries in a programme position select the programme position and press the ENTER button.

•To stop the programme function select the field EXIT and press the ENTER

button. All allocated programme positions are deleted.

4.You start playback of the programme positions by selecting the field START and press the ENTER button.

- 16 -