Silvercrest SHDP 5.1 A1 operating instructions Setup menu Dolby, Setup menu Video, Video Output

Page 12

EQUALIZER

-SOUND MODE Select this menu input if, when playing back sound, you want to use one of the preset equalizer levels ROCK, POP, LIVE, DANCE, TECHNO, CLASSIC or SOFT. To deactivate this function select the input OFF.

-BASS BOOST Select the setting ON if you want to boost the playback of the base tone. To deactivate this function select the input OFF.

-SUPER BASS Select the setting ON to use the super base sound effect. In addition playback of the base tone will be boosted. To deactivate this function select the input OFF.

-TREBLE BOOST Select the setting ON if you want to boost playback of the treble sounds. To deactivate this function select the input OFF.

3D PROCESSING

Select this menu input if you want to activate/deactivate the Pro Logic II process.

Note:

The menu option PRO LOGIC II can only be selected if the analogue 5.1 outputs are activated.

-PRO LOGIC II Select the setting ON if the process is to be activated all the time.

Select the setting AUTO if the process is only to be activated when Dolby Pro Logic II encoded content is located on the playback medium.

To deactivate this function select the input OFF.

-MODE In this menu you can set the Pro Logic II process mode.

MUSIC: Sound is played back through the speakers without delay.

MOVIE: Sound is played back with a delay of 10 ms through the rear speakers.

PRO

LOGIC: Earlier version of the DOLBY PRO LOGIC processes.

AUTO: Automatic setting of the processes (depending on the contents of the playback medium).

10.4 Setup menu DOLBY

In this OSD menu you can undertake settings for the 5.1 outputs.

GENERAL

AUDIO

DOLBY

VIDEO

PREFERENCE

 

 

 

 

 

DUAL MONO

DYNAMIC

DUAL MONO Select this menu input to set the Dolby-Digital output to either STEREO, L-MONO, R-MONO or MIX-MONO.

DYNAMIC Select this menu input to enable an optimal sound playback with reduced volume. In the setting FULL the louder passages will be surpressed and the softer passages will be played back louder.

Note:

This function is only possible when using a Dolby Digital coded 2 channel DVD.

10.5 Setup menu VIDEO

In this menu you can, for example, carry out settings for the video output, resolution or colour.

GENERAL

AUDIO

DOLBY

VIDEO

PREFERENCE

 

 

 

 

 

VIDEO OUTPUT

RGB

 

 

RESOLUTION

 

 

 

COLOR SETTING

 

 

 

HDMI SETUP

 

 

 

Xvid SUBTITLE

ENG

 

 

Note:

The menu inputs PANORAMA, DIMENSION and CENTER WIDTH serve to fine tune the sound and are only available if you have set the process mode

MUSIC.

-PANORAMA Select the setting ON to activate this sound enhancement. To deactivate this function select the input OFF.

-DIMENSION Select one of the settings SIZE -3 to SIZE 3 to activate this sound enhancement.

-CENTER WIDTH Select one of the settings LEVEL 0-7 to receive a corresponding sound enhancement.

REVERB MODE Select this menu input if you want to use, for sound playback, one of the preset reverbs CONCERT, LIVING ROOM, HALL, BATHROOM, CAVE, ARENA, or CHURCH. To deactivate this function select the input OFF.

VIDEO OUTPUT

-S-VIDEO

The video signal will be put out via the S-video output and

 

the composite video output.

-YUV

The video signal will be put out in YUV colour format via

 

the component video outputs Y, U/Pb, V/Pr.

-RGB

The video signal will be put out in RGB colour format via

 

the SCART connection.

Note:

This setting is only active if the HDMI setup is deactivated.

The composite video output on the DVD player is always activated. If the selected setting deviates from the actual connection variation (apart from composite video) it is possible that no image or a poor image will be displayed on the television screen. In this event press, when playback is stopped, several times the V-MODEbutton on the remote control until the image is displayed properly.

- 10 -

Image 12
Contents DVD Player Shdp 5.1 A1 ID-Nr. Shdp 5.1 A1-01/11-V3 IAN 64329/64330Shdp 5.1 A1 Features during playback of a DVD, VCD or S-VCD IndexTechnical Data Package contentsIntended use Operating componentsSetting up of the DVD player Safety instructionsRemote control Skip FWDRemote control Connecting the DVD player to a televisionUsing the remote control Inserting the batteriesConnecting to a television via ScartCable/RGB Connecting to a television via S-VideoConnecting via component signal YPbPr/YUV Connection to a television via video input Composite VideoConnecting audio components to the DVD player Connecting to a television via HdmiConnecting digital audio components via digital cables Requirements for the connection of a HiFi systemConnecting audio components via an analogue cable Connecting the headphonesConnecting via optical cable Connection via coaxial cableOSD menu settings Using the OSD MenuSetup menu General Administering settings via the OSD menuSetup menu Audio Setup menu Dolby Setup menu VideoVideo Output Setup menu Preference Switching the DVD player on/off Initial operation of the DVD playerInserting the DVD Supported memory card types and capacitiesPlaying back DVDs, VCDs or S-VCDs Removing memory cards/USB memory sticksMemoryStick/memory cards MS/MSPro USB memory sticks USBFeatures during playback of a DVD, VCD or S-VCD Mpeg CD Image enlargement Zoom Change playback languageChange camera aspect Angle Programmed playback ProgRepeat function with MP3/WMA/MPEG/ JPEG/Xvid discs To switch playback sound to mute Mute Display of MP3 dataDisplay of Jpeg data Playback of Jpeg discsCleaning of the DVD player CD Ripping functionDisposal Troubleshooting Glossary / Key Word Index What are DVDs, VCDs and S-VCDs?What are Title and Chapter? DecoderWarranty and Service ImporterService Great Britain Service IrelandTel 5000 720 £ 0.10/Min Mail kompernass@lidl.gb