Pyramid Car Audio PDVD44 Frequent operation System setting, Example 1Set TVscreen ratio mode

Frequent operation

System setting

Attention:

While playing, you can push [PREVIOUS] or [NEXT] to play the previous track or the next one.

While playing you can push [STOP] to back to the menu picture.

There are two kinds of file disc play mode:1. No-menu play mode.2. Menu play mode. The factory default play mode of this unit is no-menu play mode. Please refer to the description on [SETUP] setting menu for the information on the switching of play modes.

In the first play mode, after a disc is put into the player and the player reads the disc, the player will go into [STOP] state and display [STOP] on DVD display panel.

At this time, you can press a numerical key to select a file and play the disc starting with the selected file or press [PLAY] key to play the disc starting with the first file of this disc. This file may be either an MP3 file or [MPEG] file. When an MP3 is being played, you can press [DISPLAY] key to view file play time.

Note:1.If you are not quite familiar with thisunitand press [PROG] key Or select programming function through the menu when the discs described above are played,error operations will be caused.

2.If your disc contains files of multiple formats, press [STOP] key after the play of the disc is finished and display the picture that you can`t usage [UP]or[DOWN ]key controled the menu.But you may press Previous or Next key to view track numbers in the list on the right side or directly press a numerical key to select a track to play.

After a JPEG file disc is read out, you can press PLAY key to start playing.

6. System setting

Push [SETUP], the screen will display system setting menu, the moment you can push [UP], [DOWN] to move the high lighting band to the desired item, push [ENTER] to display sub-menu. In the sub-menu push [RIGHT] to enter inferior sub-menu. You can push [UP], [DOWN] to move the high lighting band in all menu pictures. Push [ENTER] your selection will be valid. Push [LEFT] to escape the sub-menu in the right of the screen. Any time push [SETUP] or [EXITSETUP] you willescape system settingstate.

The high lighting band indicates current item

The explanation to the

current item

Following are some examples of frequent setting the user can setting other itemsfollowing their instructions.

Example 1:Set TVscreen ratio mode

1.Push [SETUP] to enable the screen display the system setting picture, make sure the high lighting band has been located in GENERAL SETUP push [ENTER], TV screen will display following picture.

14 15