Pyramid Car Audio PDVD44 Example 2Set soundmix output mode, Example 3 Coaxialoutput

System setting

2.Push [RIGHT] to enter the sub-menu in the sub-menu in the right screen. If you want to set the screen to "WIDE", firstly push [DOWN] twice tomove the highlighting band to"WIDE' item, then push [ENTER],

3.Push [MAIN PAGE] to exitsystem setting.

Notes:three screen ratiomodes, i, e,16:9 WIDE, 4:3PS, 4:3 Lare available for your selection to enable different discs to match TV. the relationship between the video of disc and screen ratio mode are as follows:

Video of disc normal 4:3PS 4:3LB 16:9

4:3

16:916:9

Example 2:Set soundmix output mode

1.Push [SETUP] to enable TV screen display system setting menu picture, push[DOWN] to movethe high lightingband to the item "SPEAKER SETUP",push [ENTER], TV screen willdisplay

2.Push [RIGHT] to enter the sub-menu in the right screen, If you

want to set the sound mode to "STEREO", firstly push [DOWN]

System setting

once to move the high lighting band to "STEREO" item, then

push [ENTER].

3,Push [MAIN PAGE] to exitsystem setting page.

Example 3: Coaxialoutput

If the useruse coaxial terminalto output audiosignal, you needto set the audio output "SPDIF/RAW' or "SPDIF/PCM", you can operate following theseprocedures:

Push [SETUP] to enable TV screen display system setting menu picture, please firstly enter general setting sub-menu,then select the item "AUDIO OUTPUT" in the menu, then push [ENTER], TV screen will display:

2.Push [RIGHT] to enter the sub-menu in the right screen, push [DOWN] to move the high lighting band to the item "SPDIF/RAW" or "SPDIF/PCM",then push[ENTER].

3.Push [MAIN PAGE] to exitsystem setting.

Special indications: if you are not going to use coaxial output audio signal, youneed to setaudio output to"ANALOG' output, so there will be no audio signal to set audio output to "ANALOG" output, so there will be no audio signal to be output in the mixchannel.

16 17