Quadrant tech C-1.2D manual DVD Player Software Installation

DVD Player Software Installation

Installation

Note: The installation procedure described in this section assumes the application is supplied on floppy disks.

If the application is provided on a single CD-ROM, the following procedure still applies ⎯ wherever references are made to individual floppy disks, simply insert the single CD-ROM disc and reference the appropriate drive letter for your DVD-ROM drive (e.g. D:\ or E:\).

The DVD Player is supplied on		a set of two floppy disks labeled
“ D V D	P L A Y E R D I S K 1	O F 2 ” and “ D V D P L A Y E R
D I S K 2	O F 2 ” . The following procedure describes the installation
process.

Note: It is strongly recommended that you exit all Windows programs before you begin this installation procedure.

1. Insert the “ D V D P L A Y E R D I S K 1 O F 2 ” disk into the 3.5” drive slot on your computer.

2.Click on the Start button in the bottom left corner of the Windows 95 screen, then select Run from the list of options that appears.

3.Type a:\setup or b:\setup depending on the ID of the drive in which you’ve inserted the installation disk.

4.Just follow the simple on-screen instructions to complete the installation process. The installation program will copy files to the hard disk and create a Windows program group or folder with an icon for starting the DVD Player.

That’s it; you can now play DVD titles on your computer!

Note: The installer will not ask for Disk 2 if it is not needed for installation in your system; this is not abnormal.

User’s Guide CineMaster 15