Connection to an Audio System
Playing 2 channel audio | Playing Dolby Digital |
| |
Stereo system | Dolby Digital decoder, |
Analog audio | MD deck or DAT deck |
| |
input jacks |
|
L
AUDIO
Audio cable
(supplied)
R | COAXIAL | Digital audio |
|
| |
|
| input jack |
Audio Coaxial
Digital cable
(commercially
available)
This unit | AUDIO OUT |
|
|
| L |
|
|
| AUDIO OUT | DIGITAL | DIGITAL |
| AUDIO OUT | ||
| (Analog) | AUDIO OUT |
|
| R |
| COAXIAL |
Setup
Hint
•Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
Setting | SETUP > QUICK> |
Connection | DOLBY DIGITAL |
Connecting to a Dolby Digital decoder | BITSTREAM |
for Dolby Digital audio output. | |
|
|
Connecting to other equipment |
|
(an MD deck or DAT deck etc.) | PCM |
without Dolby Digital decoder. |
|
* To complete these settings, refer to pages
Hint
Rear Terminals
AUDIO OUT
DIGITAL
AUDIO OUT
COAXIAL | R | VIDEO | |
|
| OUT | OUT |
•The audio source on a disc in a Dolby Digital
•By hooking this unit up to a
•Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
AUDIO OUT (analog) jacks
Connect the supplied audio cable (red/white) here through the audio in jacks of a TV or other audio equipment.
VIDEO OUT jack
Connect the supplied video cable (yellow) here through the video in jack of a TV.
Connect an optional
DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio cable here through the coaxial digital audio in jack of a decoder or audio receiver.
EN |