Philco Crafts PVD1000 manual Functions, Playback

Functions

Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.

Playback

Before: Turn on the TV, amplifier and any other equipment which are connected to this unit. Make sure the TV and audio receiver (commercially available) are set to the correct channel.

1Press [STANDBY-ON]to turn on the DVD/CD Player.

2Press [OPEN / CLOSE A] and insert a disc with label facing up.

3Press [PLAY B] to start playback.

4Press [STOP C] to stop playback.

Lights up when power is on.

	OPEN/CLOSE	PLAY	STOP	STANDBY-ON
				IR
				SENSOR
2	2	3	4	1

		2
2	STANDBY-ON	SEARCH OPEN/CLOSE
1	DISPLAY	MODE
	AUDIO

Hint

•A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.

•Some DVDs may start playback from title 2 or 3 due to specific programs.

•The operation may vary when you playback DVDs with disc menu or Video CDs with PBC. Refer to the manual accompanying the disc for details.

•During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.

TIP: You can change the On-Screen language in “PLAYER MENU” setting. (Refer to page 14.)

		1	2	3
	SUBTITLE
		4	5	6
	ANGLE
		7	8	9
	REPEAT	CLEAR
			0	+10
	A-B	PAUSE		SKIP
3		SLOW
			PLAY
	REV			FWD
4			STOP

Canceling and Calling Back PBC Function Fast Forward / Reverse Search

1)Insert a Video CD and press [STOP C].

2)Press the Number buttons to enter the desired Track number.

•PBC function is now canceled and the playback of the Video CD will start.

3)To call back PBC function, press [STOP C] twice, and then press [PLAY B].

•The title menu will appear on the display.

DVD menu

Some discs contain menus which allow you to customize DVD playback. Use [K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]).

Calling Up a Menu Screen during Playback

•Press [MENU] to call up the DVD menu.

•Press [TOP MENU] to call up the title menu.

Use [FWD g] or [REV h] repeatedly
	E1
during playback to select the required forward or
reverse speed.
To continue playback, press [PLAY B].

Hint

•For DVDs, fast forward or reverse search speed is different depending on the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).

•For Audio CDs, Video CDs approximate speed is 1(x2), 2(x8) and 3(x30).

Slow Forward / Reverse

Press [FWD g] or [REV h] repeatedly in
	1
the pause mode to select the required forward or
reverse speed.
To continue playback, press [PLAY B].

Functions

Hint

•Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for more details.

Resume

Press [STOP C] during playback. Resume

Hint

•Slow forward or reverse speed is different depending on the disc. Approximate speed is 1(1/16), 2(1/8) and 3(1/2).

•Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the slow playback mode are blurred. (Refer to pages 14-15.)

•Only slow forward is available when playing a Video CD.

Zoom

message will appear on the TV screen.

Resume ON

Press 'PLAY' to play from here.

Press [PLAY B], playback will resume from	To play the beginning,
the point at which playback was stopped.	press 'STOP' first and then 'PLAY'.

Hint

•To cancel resume, press [STOP C] one more time in the stop mode.

•The resume information will be kept even when unit is in standby mode.

•Some Video CDs with the PBC function resume playback from the beginning of the track.

Paused and Step-by-Step Playback

Press [PAUSE F] during playback.

To continue playback, press [PLAY B].

The disc goes forward by one frame each time [PAUSE F] is pressed in the pause mode.

To continue playback, press [PLAY B].

Hint

•On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the pause mode are blurred. (Refer to pages 14-15.)

1)Press [ZOOM] repeatedly during playback to select the required zoom factor: x2, x4 or OFF.

x2 x4

2)Use [K / L / s / B] to slide the zoomed picture across the screen.

3)To exit zoom function, press [ZOOM] repeatedly to select OFF.

Hint

•Zooming function does not work while the disc menu is displayed.

•x4 zoom is not available on some discs.

•The picture may be distorted when you press [PAUSE k] or [REV h] repeatedly in the zoom mode.

•In the zoom mode, it automatically changes x2(x4) to the zoomed position guide.

•Only x2 zoom is available on Video CDs.

-9- EN