Philex RC027 SLX Recording device codes, Maintenance, Frequently asked questions, Specifications

Page 5

Recording device codes

It is recommended that you record your device code in case it is lost from storage when the batteries run out or are changed.

TV DEVICE CODE

Maintenance

LOW BATTERY LEVEL

If the indicator flashes twice slowly after pressing a key function, the battery level is low and you will need to fit new batteries. If the batteries are removed, your RC027 will retain its memory for approximately 10 minutes only.

Do not use old and new batteries together as old batteries tend to leak.

We do not recommend the use of rechargeable batteries.

Please follow manufacturers instructions when disposing of used batteries

Do not expose the RC027 to dust, strong sunlight, humidity, high temperature or mechanical shock.

Do not use corrosive or abrasive cleansers on your RC027.

Keep the unit dust free by wiping it with a soft, dry cloth.

Do not disassemble your RC027, it contains no user serviceable parts.

Frequently asked questions

Q.I am unable to program or operate my RC027, but the indicator lights on my RC027 operate correctly.

A.Check your A/V device. If the device’s mains switch

is turned off, your RC027 can not operate your device.

A.Check if the batteries are low and replace the batteries.

A.If several TV Codes are listed under the brand name of your A/V device, try each code one by one until most or all of the keys work correctly.

Q.The STATUS INDICATOR light does not stay ON when entering set up mode.

A.Make sure both the POWER and MUTE buttons are pressed simultaneously

Q.My A/V equipment responds only to some commands.

A.You may have selected a code for which only some commands work correctly. Try the other codes listed for your brand.

A.Try the Library Search if you are still unsuccessful.

Q.Some of my equipment will not work with any of the codes listed.

A.Try the Library Search function as some more recent codes may be available on the RC027 but have not been listed yet or have not been listed under all applicable brands.

Disclaimer: Whilst we have tried to supply a comprehensive library of codes we cannot guarantee that your RC027 will be fully compatible with all equipment. Some brands, models or functions may not be available in the code library due to differences in operation to your original remote or where the code has not yet been added to the library.

The manufacturer cannot accept any liabilities resulting from incorrect use of this product.

Specifications

Operating system:- Pre-programmed infra-red remote control system.

Compatibility:- Operates most brands of infra-red remote controlled TVs and digital satellite receivers

Power requirement:- 2 x AAA-size alkaline batteries.

Effective range:- 7.65M (25 feet), +/- 25 degrees.

Alkaline battery life:- Normal operation 6 months.

Dimensions:- 199 (L) x 56 (W) x 24 (H) mm.

Weight without batteries:- 105g

Technical support

For further information or any queries please contact

Customer careline: 0901 293 0038

Calls are charged at £1 per minute from a BT landline. Call charges from other networks may vary.

TECHNICAL SUPPORT: http://technical.philex.com

Waste electrical and electronic products must not be disposed of with household waste.

Please recycle where facilities exist. Check with your Local Authority or Retailer for recycling advice.

5

Image 5
Contents User Guide Universal Pre-programmed Remote ControlIncludes Pause , Fast Forward, Play, Rewind Function keysTV Set up by auto code search How to set up your RC027TV Setup by Auto Code Search RC027 has 3 Device Modes TV, SAT & SAT+Operating the RC027 TV set up by library searchTV code recall Turn on your TVFrequently asked questions MaintenanceSpecifications Recording device codesCode Orion LeycoProfex ProfiloCode Brand