Onkyo DV-L5 instruction manual Index to Parts and Controls, Front panel

Page 10

Index to Parts and Controls

For operational instructions, see the page indicated in brackets [ ].

Front panel

1POWER switch [15]

Turns on the main power supply for the DV-L5. The DV-L5 enters standby state. Pressing the switch again to the off position (OFF) shuts down the main power supply into the DV-L5.

Before turning on the power, make sure all cables are properly connected.

2STANDBY/ON button / STANDBY/ON indicator

[15, 16, 19, 22, 38, 54]

When STANDBY/ON button is pressed to ON while the POWER switch is set to ON, the DV-L5 turns on. The STANDBY indicator turns off and the ON indicator lights up. Pressing the button again returns the DV-L5 to the standby state. This state turns off the display, disables control functions.

3Disc tray [19]

When loading a disc, place discs in the disc tray with the label side facing up.

4Remote control sensor [9]

Point the remote control toward the remote sensor to operate the player.

5Display [11]

6TOP MENU button [20, 24]

Press to call up the top menu programmed on the DVD. Depending on the DVD, the top menu may be identical to the DVD menu.

7Cursor button/ENTER button

[16, 19, 20, 25, 27-31, 37, 38, 44, 45, 49, 51, 52, 54]

Use cursor button to move through the options on menu screens and to change settings. Use ENTER to implement settings selected with the cursor buttons or to set items highlighted in a menu.

8MENU button [20, 25, 32, 33, 48]

Use to display or close the DVD menu or MP3 Navigator screen.

9 7 button [16, 20, 22, 28, 30, 34]

Press to stop playback. Pressing once enables playback to resume from a point shortly before the location where it stopped. Pressing twice causes the disc to return to the beginning of the disc if playback starts again.

0 £ button [19, 21-24, 26-28, 30, 34]

Press to start or resume playback.

-0 button [19, 22]

Press to open and close the disc tray.

=CLEAR button [25-30, 33-35, 49]

Works in conjunction with a number of player functions. Use to cancel repeat and random playback, and to edit programs.

~REPEAT button [26]

Use to set the repeat mode.

!RANDOM button [27]

Press to play chapters/tracks in random order.

@LAST MEMORY button [34]

You can resume DVD or Video CD playback from the point you last watched even if the disc is removed from the player. Press LAST MEMORY during playback to set a Last Memory point.

When you want to resume playback of that disc, press LAST MEMORY in the stop mode and playback starts from the memorized point. Last Memory locations can be stored for up to 5 DVDs and 1 Video CD.

#DISPLAY button [36, 37, 45]

Press during playback to display statistical disc information. Press repeatedly to display different information.

$4/¢ button [20, 21]

Press to go back or advance to previous chapters/tracks. Press and hold to perform fast-reverse/fast-forward playback scanning.

%RETURN button [20, 38, 49, 52]

Use to go one menu back (current settings are maintained). Use RETURN when you do not want to change the option setting in a menu.

^SETUP button [16, 38, 39, 54]

Press when the player is in either play or stop mode to open and close the Setup screen.

&8 button [23]

Press during playback to pause. Press again to resume playback.

10

Image 10
Contents Contents DVD PlayerImportant Safeguards AvisFor British model PrecautionsFor European model About This Manual PowerRegional Restriction Codes Region Number Recording CopyrightMP3 compatibility information Playable DiscsAbout Video CDs This DVD Player can playback the following discsDifferences in Disc Composition Cleaning DiscsHandling Discs Storing DiscsTable of Contents Features Features/Supplied AccessoriesSupplied Accessories Using the Remote Controller Preparing the Remote ControllerInserting the Batteries Index to Parts and Controls Front panelDisplay Rear panelRemote controller Index to Parts and ControlsConnecting to a TV Using the Scart Cable Connecting to a TVConnecting to a TV Using the Audio/Video Connection Cable Making the analog connection with the amplifier To zconnectorMaking a digital connection with the amplifier Optical fiber connection cableConnecting the Power/ Turning on the DVD Player Setting the TV SystemWhen setting up for the first time Setting Up the PlayerUsing the Setup Navigator To exit the Setup NavigatorSettings English Factory setting français Setting the OSD Language On-Screen Display LanguageSetting the TV screen size Settings Widescreen 169 Factory setting StandardConfirming the settings Setting Up the PlayerSetting compatibility with 96 kHz output To change other player settings in the Setup screen menusGetting Started Using Your DVD Player Playing DVDs, Video CDs, CDs and MP3sTo Open or Return To the DVD or Video CD Menu Screen Getting Started Using Your DVD PlayerWhen a Menu Screen is Displayed To navigate a menu screenPress ¢ Chapter Track Skip Forward/Skip BackForward and Reverse Scanning Press £ to resume normal playbackPress 7 once Resuming playback from where you stoppedStopping Playback and Switching Power Off Remove the discFrame by frame advance playback Viewing one frame at a time Viewing a still frameViewing slow playback To return to normal playbackLocating a Specific Title/Folder/Chapter/ Track/Location Using the MP3 Navigator Navigate using the following controlsRepeating a Title, Folder, Chapter or Track Repeat PlayRepeating a Specific Segment To change titles, chapters, or tracks during random play Random PlayPlaying in Random Order To stop random playPlaying in a Favourite Order Programming DVDsProgram screen Programming MP3sPress Program to enter the MP3 Use the number buttons to enter a three-digit folder numberProgramming Video CDs, CDs Playing in a Favourite OrderAdditional programming options To save a program in memory To add a title/chapter/track to a programTo erase a program saved in memory To check whether or not a disc is recorded with angles Selecting the Camera AngleViewing from a Desired Camera Angle Multi-Angle Press Angle during playbackChanging Audio Type Changing the Audio Language Multi-Language FunctionSelecting a Subtitle Language Multi-Language Subtitles AUDIOPress Audio repeatedly to select the desired languageMemorizing a Last Memory location to return to later Resuming playback from where Last Memory was pressedContinuing Playback from a To clear the Last Memory locationMemorizing Settings for DVDs Memorizing Settings for OftenErasing the recorded contents Viewing Disc Information Viewing Disc Information during while a disc is playingUsing Dimmer function Viewing Disc Information during while a disc is stoppedAdjusting Audio and Video Settings Using the Setup Screen MenusChanging to the Setup Screen Expert Menu Mode Settings Expert Basic Factory settingSetting the Digital Audio Output Adjusting Audio and Video SettingsAdjusting the Dynamic Range of the Audio Soundtrack Dolby Digital OutMpeg Out DTS OutKHz PCM Out Digital Out ExpertWide Factory setting Setting the TV Screen SizeSettings 43 Letter Box Pan & Scan Differences in screen sizes and DVD formatsSwitching the S-Video Output Expert Setting the Video 1 OptionsSetting the Video Output Format for the AV Connector Turning the Screen Saver On and Off ExpertAdjusting the Video Quality Selecting a preprogrammed settingUse the cursor button ∞ to select Video Setup and press Use the cursor buttons 2/3 to adjust the settingsRepeat steps 4 and 5 to make adjustments to other settings To memorize the setting, select Memory 1, 2, 3, then pressTurning the angle indicator on and off Expert Setting the Video 2 OptionsSetting the Position of the On-screen Display Expert Changing the Background of the ScreenSettings English Factory setting Setting the Language OptionsSetting the On-screen Display OSD Language Selecting an audio language preferenceSelecting a subtitle language preference Settings On Factory settingSettings w/ Subtitle Language Factory setting Selecting a DVD menu language preferenceForcing subtitles to be displayed Expert When Other is selectedSettings With Audio Selected Subtitle Factory setting Off Assist SubtitleLanguage Code List Language Input-codeSettings Password Setting the Parental Lock LevelEntering the Password LevelSetting the Country Code Setting the Parental Lock LevelChanging the Password Press Enter to set the new levelCountry Code List Country Input-code Country-codeResetting the Player to System Settings Memorizing settings Function MemoryRecalling memorized settings To clear the Function MemorySymptoms Causes Remedies Pages TroubleshootingDVD Player Troubleshooting DVD Player Remote ControllerDVD Player SpecificationsOutputs Page Page Onkyo U.S.A. Corporation Onkyo Europe Electronics GmbH