Onkyo DV-L5 Making a digital connection with the amplifier, Optical fiber connection cable

Page 14

Connecting to an Amplifier

(To Enjoy the Sound Advantage of the DVD Player)

Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on the opposite page, connecting with an amplifier provides you high quality dynamic sounds.

To reproduce Dolby Digital surround, MPEG1 audio, MPEG2 audio, and DTS surround sound, you need to connect to an amplifier with a Dolby Digital, MPEG1 audio, MPEG2 audio, and DTS decoder respectively.

Before connecting

•Refer to the instruction manual of the amplifier.

•When you connect the DVD Player to the amplifier, be sure to turn off the power and unplug both units from the mains before making any connections. Otherwise, the speakers may be damaged.

•Connect the plugs securely.

Incomplete

Notes

•The remote controller supplied with Onkyo amplifier can be used to operate the DVD player.

•The function of the upper and lower z connectors are the same. Connect to either one.

Insert completely

■Making a digital connection with the amplifier

If your ampolifier has a digital input jack, be sure to connect it to either DIGITAL OUTPUT OPTICAL or COAXIAL jack on the DVD player.

Note

DO NOT connect to the AC-3RF input (e.g. of a Dolby Digital receiver) which is reserved only for video disc players.

: Signal flow

Be sure to set the digital output setting after connection using the Setup Navigator explained in “Setting Up the Player” starting on page 16 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 38.

Optical fiber connection cable

To Digital optical jack

	Coaxial connection cable
	To Digital coaxial jack	An amplifier with a Dolby
		Digital/DTS/MPEG1/MPEG2
	z cable	decoder or 2 channel digital
	z cable	stereo
	To zconnector	stereo
	To zconnector

DO NOT connect the mains lead at this time.

■Making the analog connection with the amplifier

If your amplifier has no digital audio input, you can make the analog connection. If the amplifier has a Dolby Pro Logic decoder, you can reproduce the Dolby Pro Logic surround sound.

zcable

To zconnector

Stereo audio connection cable

To audio input

L (White)

R (Red)

An amplifier with no digital connection

14

Image 14

Contents Contents DVD PlayerImportant Safeguards AvisFor European model PrecautionsFor British model About This Manual PowerRegional Restriction Codes Region Number Recording CopyrightMP3 compatibility information Playable DiscsAbout Video CDs This DVD Player can playback the following discsDifferences in Disc Composition Cleaning DiscsHandling Discs Storing DiscsTable of Contents Supplied Accessories Features/Supplied AccessoriesFeatures Inserting the Batteries Preparing the Remote ControllerUsing the Remote Controller Index to Parts and Controls Front panelDisplay Rear panelRemote controller Index to Parts and ControlsConnecting to a TV Using the Audio/Video Connection Cable Connecting to a TVConnecting to a TV Using the Scart Cable Making the analog connection with the amplifier To zconnectorMaking a digital connection with the amplifier Optical fiber connection cableConnecting the Power/ Turning on the DVD Player Setting the TV SystemWhen setting up for the first time Setting Up the PlayerUsing the Setup Navigator To exit the Setup NavigatorSettings English Factory setting français Setting the OSD Language On-Screen Display LanguageSetting the TV screen size Settings Widescreen 169 Factory setting StandardConfirming the settings Setting Up the PlayerSetting compatibility with 96 kHz output To change other player settings in the Setup screen menusGetting Started Using Your DVD Player Playing DVDs, Video CDs, CDs and MP3sTo Open or Return To the DVD or Video CD Menu Screen Getting Started Using Your DVD PlayerWhen a Menu Screen is Displayed To navigate a menu screenPress ¢ Chapter Track Skip Forward/Skip BackForward and Reverse Scanning Press £ to resume normal playbackPress 7 once Resuming playback from where you stoppedStopping Playback and Switching Power Off Remove the discFrame by frame advance playback Viewing one frame at a time Viewing a still frameViewing slow playback To return to normal playbackLocating a Specific Title/Folder/Chapter/ Track/Location Using the MP3 Navigator Navigate using the following controlsRepeating a Specific Segment Repeat PlayRepeating a Title, Folder, Chapter or Track To change titles, chapters, or tracks during random play Random PlayPlaying in Random Order To stop random playPlaying in a Favourite Order Programming DVDsProgram screen Programming MP3sPress Program to enter the MP3 Use the number buttons to enter a three-digit folder numberAdditional programming options Playing in a Favourite OrderProgramming Video CDs, CDs To erase a program saved in memory To add a title/chapter/track to a programTo save a program in memory To check whether or not a disc is recorded with angles Selecting the Camera AngleViewing from a Desired Camera Angle Multi-Angle Press Angle during playbackChanging Audio Type Changing the Audio Language Multi-Language FunctionSelecting a Subtitle Language Multi-Language Subtitles AUDIOPress Audio repeatedly to select the desired languageMemorizing a Last Memory location to return to later Resuming playback from where Last Memory was pressedContinuing Playback from a To clear the Last Memory locationErasing the recorded contents Memorizing Settings for OftenMemorizing Settings for DVDs Viewing Disc Information Viewing Disc Information during while a disc is playingUsing Dimmer function Viewing Disc Information during while a disc is stoppedAdjusting Audio and Video Settings Using the Setup Screen MenusChanging to the Setup Screen Expert Menu Mode Settings Expert Basic Factory settingSetting the Digital Audio Output Adjusting Audio and Video SettingsAdjusting the Dynamic Range of the Audio Soundtrack Dolby Digital OutMpeg Out DTS OutKHz PCM Out Digital Out ExpertWide Factory setting Setting the TV Screen SizeSettings 43 Letter Box Pan & Scan Differences in screen sizes and DVD formatsSwitching the S-Video Output Expert Setting the Video 1 OptionsSetting the Video Output Format for the AV Connector Turning the Screen Saver On and Off ExpertAdjusting the Video Quality Selecting a preprogrammed settingUse the cursor button ∞ to select Video Setup and press Use the cursor buttons 2/3 to adjust the settingsRepeat steps 4 and 5 to make adjustments to other settings To memorize the setting, select Memory 1, 2, 3, then pressTurning the angle indicator on and off Expert Setting the Video 2 OptionsSetting the Position of the On-screen Display Expert Changing the Background of the ScreenSettings English Factory setting Setting the Language OptionsSetting the On-screen Display OSD Language Selecting an audio language preferenceSelecting a subtitle language preference Settings On Factory settingSettings w/ Subtitle Language Factory setting Selecting a DVD menu language preferenceForcing subtitles to be displayed Expert When Other is selectedSettings With Audio Selected Subtitle Factory setting Off Assist SubtitleLanguage Code List Language Input-codeSettings Password Setting the Parental Lock LevelEntering the Password LevelSetting the Country Code Setting the Parental Lock LevelChanging the Password Press Enter to set the new levelCountry Code List Country Input-code Country-codeResetting the Player to System Settings Memorizing settings Function MemoryRecalling memorized settings To clear the Function MemoryDVD Player TroubleshootingSymptoms Causes Remedies Pages Troubleshooting DVD Player Remote ControllerOutputs SpecificationsDVD Player Page Page Onkyo U.S.A. Corporation Onkyo Europe Electronics GmbH