Controlling an Onkyo MD recorder

Using remote controller

ON STANDBY

MD MODE

VOL

MUTING

MD operation buttons

Numeric keys

ENTER

The conneÇóctor of the Onkyo MD recorder must be connected to the TX-SR700/700E/600/600E (see page 29).

1.Press the MD MODE button.

The MD MODE button lights green.

2.Press the desired operation button.

The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo MD recorder.

Operation buttons:

ON: Turns on and off MD player (same as the STANDBY button on the remote controller)

: Track down

: Track up

: Play

: Stop

: Skip backward

: Skip forward

REC: Record

: Pause

: Eject

1 to 9, 0, --/---: Numeric keys

ENTER: Enters settings

You may also use the following buttons:

VOL : Adjusts volume at TX-SR700/700E/600/600E

MUTING: Activates muting function at TX-SR700/700E/600/ 600E

TV MODE TV

VCR MODE VCR

VOL

MUTING

VCR and TV MODE buttons

No preset codes are programmed into the VCR and TV MODE buttons. Therefore you can use these buttons to program the remote controller signals of other devices.

There are two methods. One method is selecting the name of a different brand from the table, entering the setting number listed, and calling up the pre-programming code (see page 67). The other method is sending the commands from the other brand’s remote control directly into this remote controller (see page 70).

When in the VCR and TV mode, you may use the following buttons: VOL : Adjusts volume at TX-SR700/700E/600/600E

MUTING: Activates muting function at TX-SR700/700E/600/ 600E

TV: Turns on and off the television

(and switches to the TV mode)

VCR: Turns on and off the VCR

(and switches to the VCR mode)