3.Press the required DEVICE KEY and the DEVICE KEY will light up.
4.Enter the Key Reconfiguration activation code 777.
5.Press slowly and repeatedly the key you wish to
device performs the required/correct function.
NB During the search, your RCx4 will transmit the code of every key com- mand programmed into the device code you are reconfiguring to find the key function you want. If you reach the end of the command set without finding the required function, the STATUS LED will flash twice red and the RCx4 will exit reconfiguration mode.
6.Press the relevant DEVICE KEY [TV, VCR, SAT, DVD] to store the corrected code. The DEVICE INDICATOR key will flash twice.
7.Repeat 4 and 5 for any other keys you wish to modify.
8.Press the relavant Device key 2 times to exit the reconfiguration function. Please Note:
A maximum of 4 keys can be reconfigured for each Device (TV, VCR, SAT and DVD). After the 4 keys are reconfigured for one Device, if you try to reconfigure a fifth key, the DEVICE INDICATOR key will blink several times
and then go out (exiting Reconfiguration Mode).
If no other key is pressed for more than 20 seconds, the RCx4 will automatically exit Reconfiguration Mode.
During key reconfiguration, only the key you are reconfiguring and the DEVICE INDICATOR key will function.
Not all key functions may be relavant to your device or be programmed into the Device code selected. If there are no functions programmed for a particular key instead of the DEVICE INDICATOR key flashing twice it will remain lit for one second and then go out and the RCx4 will exit reconfiguration mode.
You can clear reconfigured codes by entering a new Device code. When a new Device code is enterd all Key functions will be reset to the default key settings for the new code including any that may have been previously reconfigured.
RECORDING DEVICE CODES
It is recommended that you record your device codes in case they are lost from storage when the batteries run out or are changed.
DEVICE KEY | DEVICE |
| CODE |
|
|
|
| |
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
TV |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SAT/CTV |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DVD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAINTENANCE |
|
|
|
|
|
|
| |
LOW BATTERY LEVEL |
|
|
|
|
|
|
| |
If the indicator flashes twice | slowly | after | pressing | a | key | |||
function, the | battery level is | low | & you | must | fit | new | ||
batteries. If the batteries are removed, your RCx4 will retain its memory for approximately 10 minutes only.
•Do not use old and new batteries together as old batteries tend to leak.
•We do not recommend the use of rechargeable batteries.
•Please follow manufacturers instructions when disposing of used batteries
•Do not expose the RCx4 to dust, strong sunlight, humidity, high temperature or mechanical shock.
•Do not use corrosive or abrasive cleansers on your RCx4.
•Keep the unit dust free by wiping it with a soft, dry cloth.
•Do not disassemble your RCx4, it contains no user serviceable parts.
FREQUENTLY ASKED QUESTIONS
Q.I am unable to program or operate my RCx4, but the indicator lights on my RCx4 operate correctly.
A.Check your A/V device. If the device’s mains switchis turned off, your RCx4 can not operate your device.
A.Check if the batteries are low and replace the batteries.
A.If several Device Codes are listed under the brand name of your A/V
device, try each code one by oneuntil most or all of the keys work cor- rectly.
Q. The STATUS INDICATOR light does not stay ON when entering set up mode.
A.Make sure both the POWER and MUTE buttons are pressed simultane- ously
Q.My A/V equipment responds only to some commands.
A.You may have selected a code for which only some commands work correctly. Try the other codes listed for your brand.
A.Try the Library Search if you are still unsuccessful.
Q.Some of my equipment will not work with any of the codes listed.
A.Make sure that you have selected the correct device listing
A.Try the Library Search function as some more recent codes may be available on the RCx4 but have not been listed yet or have not been listed under all applicable brands.
Disclaimer: Whilst we have tried to supply a comprehensive library of codes we cannot guarantee that your RCx4 will be fully compatible with all equipment. Some brands, models or functions may not be available in the code library due to differences in operation to your original remote or where the code has not yet been added to the library.
The manufacturer cannot accept any liabilities resulting from incorrect use of this product.
SPECIFICATIONS
Operating system:-
Compatibility:- Operates most brands of
Power requirement:- 2 x
Effective range:- 7.65M (25 feet), +/- 25 degrees.
Alkaline battery life:- Normal operation 6 months.
Dimensions:- 199 (L) x 56 (W) x 24 (H) mm.
Weight without batteries:- 105g
TECHNICAL SUPPORT
Customer Care Line - Tel: 08457 573 479 (UK only)
Technical Support Web Site: http://technical.philex.com
Technical Web Site Enquiries: technical@philex.com
ENVIRONMENTAL POLICY
Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or Retailer for recycling advice.
5