Allied Telesis Switch Default Username and Password Configuration Guide

How to Start an AT-GS950/8 WEB Management Session

User Name and Password Configuration

Add New User

Name and

Password

Password protection is always enabled for access to the AT-S107 Management software. This section explains how to create new users names and passwords and how to modify or delete existing users for the web interface. See the following sections:

“Add New User Name and Password” on page 23

“Modify User Name and Password” on page 24

“Delete User Name and Password” on page 25

The default User Name and Password is “manager” and “friend” - both without the quotes. To configure new User Name and Password information, perform the following procedure:

1.From the main menu on the left side of the page, click the System folder.

The System folder expands.

2.From the System folder, select Administration. The Administration Page is displayed. See Figure 10.

Figure 10. Administration Page

3.To create a user name, enter a user name in the box next to the User Name field.

You can enter a value of up to 12 alphanumeric characters. The User Name field is case sensitive.

23