Allied Telesis AT-GS950/8 manual User Interface Configuration

How to Start an AT-GS950/8 WEB Management Session

User Interface Configuration

This procedure explains how to enable and disable the user interfaces on the switch. With this procedure you can enable or disable the AT-GS950/8 SNMP Agent. For more information about SNMP, see the AT-GS950 Web User Guide.

The Web Server Status is displayed as Enabled for your information only. The Web Server cannot be disabled.

SNMP Interface To enable or disable the AT-GS950/8 SNMP interface, perform the following procedure:

1.From the main menu on the left side of the page, click the System folder.

The System folder expands.

2.From the System folder, select User Interface.

The User Interface Page is displayed. See Figure 12.

Figure 12. User Interface Page

3.Choose Enable or Disable from the pull down list for the SNMP Agent parameter.

Enabled - When you enable this parameter, the SNMP agent is active. You can manage the AT-GS950/8 switch with Network Management Software and the switch’s private MIB.

Disabled - When you enable this parameter, the SNMP agent is inactive.

Note

For more information about SNMP, see the AT-GS950 Web User

Guide.

4.Click Apply located under the Web Server Status Enable/Disable field.

26