Delete an IP
Address List
Entry
How to Start an AT-GS950/8 WEB Management Session
5.From the IP Restriction Status field, select one of the following choices from the
Enable - This selection restricts the access to the
Disable - This selection allows unrestricted access to the
6.Click Apply.
Access to the management software is now restricted to those IP addresses listed in the IP Access List table.
7.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
To delete an IP address from the IP Access List, perform the following procedure:
1.From the main menu on the left side of the page, click the System folder.
The System folder expands.
2.From the System folder, select IP Access List.
The IP Access List Page is displayed. See Figure 6 on page 11.
3.Select Delete next to the IP address that you want to remove. The IP address is removed from the IP Access List table. If you remove the last IP address from the table, the IP Restriction Status field is set to Disable.
4.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
13
