Onkyo DV-S939 Setting Progressive, Progressive 43 Output, Progressive Conversion, PAL/Auto

Setting: Progressive DVD-V VCD

You can fine adjust picture quality and store up to 3 picture setting in the memory of the DVD Player. (Only when connected to a

PROGRESSIVE TV.)

To select a preset memory setting:

1Press / to select a memory number (1 to 3), and press the ENTER button.

Picture
TV Shape	4:3 LB	1
Blacker than Black	Off	2
Setting : Interlaced	1	3
Setting : Progressive	1
Progressive 4:3 Output Full
Progressive Conversion Auto

2	Press	/ to select the element, and press the ENTER button.
		Setting Progressive
		Contrast	0
		Brightness	0
		Color	0
		Tint	0
		Edge Enhance	Off
3	Press	/ to adjust the value, and press the ENTER button.

(–7) Lower	Contrast	Higher (+7)
(0) Darker	Brightness	Brighter (+14)
(–7) Duller	Color	Brighter (+7)
(–7) Redder	Tint	Greener (+7)

Edge Enhance

To enhance picture edges.

(Off < On < Expanded1 < Expanded2)

Progressive 4:3 Output
	DVD-V	VCD

Select the video output of pictures recorded in 4:3 format. (Only when connected to a PROGRESSIVE TV.)

4:3: Displays images in 4:3 aspect ratio with masking bars to the left and right of the picture.

Full: Displays pictures expanded horizontally to fill the 16:9 screen.

Progressive Conversion
	DVD-V

There are two types of source content in pictures recorded in DVD- Video: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed.

Auto: Displays this operation normally.

The DVD Player automatically detects source content, film or video, of playback source, and converts it in the progressive output format in an appropreate method.

Video: The DVD Player filters video signal, and converts it in the progressive output format appropriately.

Suitable for playback of video content pictures.

Film: The DVD Player converts film content pictures in the progressive output format appropriated. Suitable for playback of film content pictures. The progressive output feature will be most effective under this selection.

Note

Depending on the disc, pictures may be cut off or doubled. In this case, select “Video”.

PAL/Auto* DVD-V VCD

PAL: Select to play PAL discs.

Connect a PAL TV to view pictures.

Auto: The DVD Player automatically detects PAL and NTSC video systems of discs.

Connecting a multisystem TV (PAL/NTSC compatible) is needed to view pictures.

Note

A playback picture may be distorted temporarily when the detected signal changes between PAL and NTSC on the disc.

* Not applicable for USA and Canadian models

47

DV-S939(US_E)p44-55.p65 47 10/2/00, 3:25 PM