PAGE 16
CONNECTIONS
ConnectingtoaTVequippedwithcomponentvideoinputs
PROGRESSIVE SCAN: Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.
COMPONENT VIDEO OUT: Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback.
■To switch the output signal (Progressive/Component)
Set the Progressive to “On” on the SETUP menu for Progressive signal, or set the Progressive to “Off” on the SETUP menu for Component video signal.
VIDEO OUTPUT SELECT switch
12V
TRIGGER
IN
Video cable (Y, Pb, Pr) (not supplied)
To AUDIO OUT (L/R) | To COMPONENT VIDEO OUT/ | |
PROGRESSIVE SCAN (Pb, Pr, Y) | ||
|
When using COMPONENT VIDEO OUT/PROGRESSIVE
SCAN jack, set the VIDEO OUTPUT SELECT switch to
COMPONENT/PROGRESSIVE SCAN.
Audio/Video cable (supplied)
To component video input or progressive scan video input
To audio inputs
TV or monitor with component video or progressive scan inputs
Notes
❍Refer to the owner’s manual of your TV for TV operating instructions.
❍Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.
❍Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y,
❍In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.