PAGE 12
CONNECTIONS
ConnectingtoSurroundSoundSystem
Enjoying Dolby Digital Sound
You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic, and 2 Channel Digital Stereo.
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD player to a 5.1 channel receiver equipped with a Dolby Digital decoder or Dolby Digital processor.
12V
TRIGGER
IN
To DIGITAL OUT (COAXIAL or OPTICAL)
To
75 ohm coaxial cable
or Optical cableS-Video cable or Video cable
Receiver equipped | To digital | Connection | |
with a Dolby Digital | |||
audio input | example | ||
decoder | |||
|
|
To enjoy Dolby Digital sound from this DVD player you need the following:
●DVD recorded in Dolby Digital
●5.1 channel receiver equipped with a Dolby Digital decoder, or Dolby Digital processor and power receiver
●5 speakers and 1 sub woofer
To enjoy Dolby Digital sound
You need to select “Dolby Digital” on the SETUP menu.
| To | Front speaker | |
| or Video Input | ||
| (right) | ||
Front speaker | Center | ||
| |||
(left) |
| ||
speaker |
| ||
|
|
| Sub woofer |
Rear speaker | Rear speaker |
(left surround) | (right surround) |
*Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the
Notes
❍Refer to the owner’s manual of your audio system for operating instructions.
❍Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
❍The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
❍Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be damaged.