ENGLISH FRANÇAIS DEUTSCH
Setup
CONNECTING TO A SURROUND SOUND SYSTEM
One can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic and 2 Channel Digital Stereo.
ABOUT DOLBY DIGITAL SOUND
Dolby Digital is the surround sound technology used in theatres showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs by connecting the M55 to a 5.1 channel A/V receiver equipped with a Dolby Digital decoder
NEDERLANDS ESPAÑOL ITALIANO
To enjoy Dolby Digital sound from this DVD player you need the following:
•DVD recorded in Dolby Digital surround format.
•
•5 speakers and 1 sub woofer
From DIGITAL OUT jack (COAXIAL or OPTICAL)
75 ohm coaxial cable or optical cable
To digital input jack of surround receiver equipped with Dolby Digital decoder (coaxial or optical).
Front speaker (left)
Rear speaker (left surround) 
From
To
To
Video input
Centre speaker
Rear Speaker (right surround)
Connection example
Front speaker (right)
Subwoofer
PORTUGUÊS SVENSKA
TO ENJOY DOLBY DIGITAL SOUND
You need to select from the OSD drop down menu of the M55, Audio, ‘Dolby Digital/PCM’ and ‘Sample Freq.’, ‘96 kHz’ or ‘48 kHz’. If uncertain, leave the default ‘Stream/PCM’ and ‘48 kHz’ from the menu. Do not connect the Digital Audio Output of this DVD player to your receiver unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital or DTS decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Selecting Digital Audio Output. (Refer to Initial Setup Settings, Audio)
NOTE
Refer to the owner’s manual of your audio equipment as well. Depending on your Dolby Digital surround sound decoder, the decode rate may be 96 kHz or 48 kHz. When you connect the M55 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. The output sound of the M55 has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or disconnect the M55’s power cord. If you leave the receiver power on, the speakers may be damaged.
20