Installing the Batteries, Connecting the Receiver

Targus Voice Recording presenter with Laser Pointer

Installing the Batteries

•Before you start, please install the 2 AAA batteries (supplied).

•Open the battery cover located on the back of the presenter and insert the batteries according to the correct polarities.

•Replace the battery compartment cover.

Note: It’s not recommended to use rechargeable batteries. For best performance use Alkaline batteries.

Connecting the Receiver

To connect the receiver to your computer, plug the USB receiver into an available USB port on your computer.

Your computer’s operating system identifies the receiver as a “USB Human Interface Device” and begins installing the default driver. Follow any on-screen procedures to complete the default driver installation.

Note: This presenter is a plug-n-play device. It should be operating once the USB receiver is connected and recognized by the computer.

Battery Compartment