VocoPro DVG-399K owner manual Rear panel descriptions

Rear panel descriptions

Rear

6 7 8

1.5.1 CH. AUDIO OUTPUT jacks - These jacks are for connecting to 5.1 channel ready amplifiers/receivers. The labels on each jack specify which speaker in your surround sound system to output to. CENT-center,

SUR W- subwoofer, SUR L- surround left, SR- surround right, FL- front left, FR- front right.

NOTE: If you are using the standard L/R stereo connection, use the FL and FR outputs.

2.VIDEO (RCA) output jack - The VIDEO jack outputs video using an RCA video cable.

3.COMPONENT VIDEO OUT - These jacks output VIDEO to a TV monitor via COMPONENT VIDEO cables. COMPONENT VIDEO outputs the different color signals (B and R) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors. The description of the component video output connectors might differ depending on the TV set or monitor (i.e. Pr/Pb/Y or Cr/Cb/Y or R-Y/B-Y/Y etc.). Component video cables only transmit the video signal; separate cables are needed for audio signals. Please refer to the operating instructions of the TV set or monitor for details.

4.VGA - For direct connection, using a VGA cable to an HDTV/VIDEO Monitor.

5.AC IN connection - Connect AC Power Cord from the wall outlet to this connection.

6.S-VIDEO output jack - This jack outputs to a display device (TV, TFT, etc.) using an S-VIDEO cable. SVIDEO provides better color separation and better resolution by separating the color and picture signals of a composite-video signal.

7.COAXIAL OUT jack - This digital output is for connecting to devices with a COAXIAL cable.

8.OPTICAL OUT jack - This digital out is for connecting devices with an OPTICAL cable. Please make sure to remove the protective cover from this jack prior to connecting an OPTICAL cable. When not using this input, keep the protective cover on to protect it from dust and foreign material.

11