![](/images/new-backgrounds/1137153/13715343x1.webp)
Setting up preferences cont
DIGITAL SETUP
1. OP MODE
LINE OUT: This is the standard Digital Output setting.
RF REMOD: When primarily using headphones.
2. DYNAMIC RANGE
This selects the Line Out ratio.
NOTE: This can only be used when LINE OUT is chosen in the OP MODE options.
FULL: The audio signal peak value will be the minimum
OFF: The audio signal peak value will be the maximum.
3. DUAL MONO
Here you can choose between STEREO,
you stay in STEREO mode for best results.
21